Centreon Broker Event Mapping

Centreon Broker uses global mapping tables for events that can be exchanged. This page list properties available for each event type.

NEB

Acknowledgement

The acknowledgement of an incident means that the problem has been taken into account by a user of the monitoring. When the user acknowledges the problem, Centreon Engine emits an acknowledgement event.

BBDO v2

NEB::Acknowledgement

Category	element	ID
1	1	65537

The content of this message is serialized as follows:

Property	Type	Description
acknowledgement_type	short integer	Host acknowledgement when 0, service acknowledgement when 1.
author	string	Acknowledgement author.
comment	string	Comment associated to the acknowledgement.
deletion_time	time	Time at which the acknowledgement was deleted. If 0, it was not deleted.
entry_time	time	Time at which the acknowledgement was created.
host_id	unsigned integer	Host ID.
instance_id	unsigned integer	Instance ID.
is_sticky	boolean	Sticky flag.
notify_contacts	boolean	Notification flag.
persistent_comment	boolean	True if the comment is persistent.
service_id	unsigned integer	Service ID. 0 for a host acknowledgement.
state	short integer	Host / service state.
notify_only_if_not_already_acknowledged	boolean	A notification should be sent only if not already ack.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Comment

In several situations, the user has to enter a comment in the Centreon interface. When they validate it, Centreon Engine emits a comment event.

BBDO v2

NEB::Comment

Category	element	ID
1	2	65538

The content of this message is serialized as follows:

Property	Type	Description
author	string	Comment author.
comment_type	short integer	1 for a host comment, 2 for a service comment.
data	string	Comment data (text).
deletion_time	time	Time at which the comment was deleted. 0 if the comment was not deleted (yet).
entry_time	time	Time at which the comment was created.
entry_type	short integer	1 for a user comment (through external command), 2 for a downtime comment, 3 for a flapping comment and 4 for an acknowledgement comment.
expire_time	time	Comment expiration time. 0 if no expiration time.
expires	bool	True if the comment expires.
host_id	unsigned integer	Host ID.
internal_id	unsigned integer	Internal monitoring engine ID of the comment.
persistent	boolean	True if the comment is persistent.
instance_id	unsigned integer	Instance ID.
service_id	unsigned integer	Service ID. 0 if this is a host comment.
source	short integer	0 when the comment originates from the monitoring engine (internal) or 1 when the comment comes from another source (external).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Custom variable

A custom variable is essentially a variable with a name and a value. It often comes from Centreon Engine macros. For Centreon to work correctly, these custom variables must be sent to Centreon Broker. Each one is sent thanks to a custom variable event.

BBDO v2

NEB::CustomVariable

Category	element	ID
1	3	65539

The content of this message is serialized as follows:

Property	Type	Description
enabled	boolean	True if the custom variable is enabled.
host_id	unsigned integer	Host ID.
modified	boolean	True if the variable was modified.
name	string	Variable name.
service_id	unsigned integer	Service ID. 0 if this is a host custom variable.
update_time	time	Last time at which the variable was updated.
var_type	short integer	0 for a host custom variable, 1 for a service custom variable.
value	string	Variable value.
default_value	string	The default value of the custom var.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Custom variable status

Custom variable status events are generated when a custom variable needs to be updated.

BBDO v2

NEB::CustomVariableStatus

Category	element	ID
1	4	65540

The content of this message is serialized as follows:

Property	Type	Description
host_id	unsigned integer	Host ID.
modified	boolean	True if the variable was modified.
name	string	Variable name.
service_id	unsigned integer	Service ID. 0 if this is a host custom variable.
update_time	time	Last time at which the variable was updated.
value	string	Variable value.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Downtime

This event is emitted by Centreon Engine when a downtime is set on a resource.

BBDO v2

NEB::Downtime

Category	element	ID
1	5	65541

The content of this message is serialized as follows:

Property	Type	Description
actual_end_time	time	Actual time at which the downtime ended.
actual_start_time	time	Actual time at which the downtime started.
author	string	Downtime creator.
downtime_type	short integer	1 for a service downtime, 2 for a host downtime.
deletion_time	time	Time at which the downtime was deleted.
duration	time	Downtime duration.
end_time	time	Scheduled downtime end time.
entry_time	time	Time at which the downtime was created.
fixed	boolean	True if the downtime is fixed, false if it is flexible.
host_id	unsigned integer	Host ID.
instance_id	unsigned integer	Instance ID.
internal_id	unsigned integer	Internal monitoring engine ID.
service_id	unsigned integer	Service ID. 0 if this is a host downtime.
start_time	time	Scheduled downtime start time.
triggered_by	unsigned integer	Internal ID of the downtime that triggered this downtime.
was_cancelled	boolean	True if the downtime was cancelled.
was_started	boolean	True if the downtime has been started.
comment	string	Downtime comment.
is_recurring	boolean	True if this downtime is recurring.
recurring_tp	string	The recurring timepriod of the recurring downtime.
come_from	short	Id of the parent recurring downtime for spawned downtimes.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Event handler

Event handlers are optional system commands (scripts or executables) that are run whenever a resource state change occurs. When such a command is configured, an event handler event is emitted by Centreon Engine. These BBDO events are usually sent when Centreon Engine is restarted or reloaded.

BBDO v2

NEB::EventHandler

Category	element	ID
1	6	65542

The content of this message is serialized as follows:

Property	Type	Description
early_timeout	boolean	True if the event handler timed out.
end_time	time	Time at which the event handler execution ended.
execution_time	real	Execution time in seconds.
handler_type	short integer	0 for host-specific event handler, 1 for service-specific event handler, 2 for global host event handler and 3 for global service event handler.
host_id	unsigned integer	Host ID.
return_code	short integer	Value returned by the event handler.
service_id	unsigned integer	Service ID. 0 if this is a host event handler.
start_time	time	Time at which the event handler started.
state	short integer	Host / service state.
state_type	short integer	0 for SOFT, 1 for HARD.
timeout	short integer	Event handler timeout in seconds.
command_args	string	Event handler arguments.
command_line	string	Event handler command line.
output	string	Output returned by the event handler.
source_id	unsigned integer	The id of the source instance of this event.
destination_id	unsigned integer	The id of the destination instance of this event.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Flapping status

When the status of a resource is unstable, Centreon Engine tags it as flapping.

BBDO v2

NEB::FlappingStatus

Category	element	ID
1	6	65543

The content of this message is serialized as follows:

Property	Type	Description
event_time	time	Time at witch the flapping event has been occured
event_type	integer	1000 for start, 1001 stop
flapping_type	short integer	0 for host, 1 for service
high_threshold	real	High flapping threshold.
host_id	unsigned integer	Host ID.
low_threshold	real	Low flapping threshold.
percent_state_change	real	percent of state change
reason_type	short integer	not used
service_id	unsigned integer	Service ID. 0 if this is a host flapping entry.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Tag

The tag is a new configuration event currently used for categories and groups.

At the moment, it is used in parallel with group events and other things but in a near future should be more global.

BBDO v2

There are no tag events in BBDO v2.

BBDO v3

NEB::PbTag

Category	element	ID
1	34	65570

This event is a Protobuf event so items are not serialized as in BBDO v2 events but using the Protobuf 3 serialization mechanism. When BBDO v3 is used, no more NEB::Tag events should be sent, instead you should see NEB::PbTag events.

The protobuf message is the following:

enum TagType {
  SERVICEGROUP = 0;       // Tag representing a service group
  HOSTGROUP = 1;          // Tag representing a host group
  SERVICECATEGORY = 2;    // Tag representing a service category
  HOSTCATEGORY = 3;       // Tag representing a host category
}

message Tag {
  uint64 id = 1;          // Tag ID (unicity obtained by coupling it with the type)
  enum Action {
    ADD = 0;              // With this action, the event adds a new tag.
    DELETE = 1;           // With this action, the event removes a tag.
    MODIFY = 2;           // With this action, the event modifies a tag.
  }

  Action action = 2;      // The current action for this event.
  TagType type = 3;       // The type of this tag.
  string name = 4;        // Name of this tag.
  int64 poller_id = 5;    // Poller ID.
}

This event is emitted every time a change is made to the configuration of a host and the configuration is deployed.

Host

BBDO v2

NEB::Host

Category	element	ID
1	12	65548

The content of this message is serialized as follows:

Property	Type	Description
acknowledged	boolean	true if the problem has been acknowledged
acknowledgement_type	short integer	0 none, 1 normal, 2 sticky
action_url	string	url to obtain information about host
active_checks_enabled	boolean	active check
address	string	IP of the host
alias	string	alias
check_freshness	boolean	passive freshness check activated
check_interval	real	interval in units (usually 60s) between 2 checks
check_period	string	time period when checks are authorized
check_type	short integer	0 active, 1 passive
current_check_attempt	short integer	number of failed checks
current_state	short integer	0 up, 1 down, 2 unreachable
default_active_checks_enabled	boolean	same as active_checks_enabled
default_event_handler_enabled	boolean	same as event_handler_enabled
default_flap_detection_enabled	boolean	same as flap_detection_enabled
default_notifications_enabled	boolean	same as notifications_enabled
default_passive_checks_enabled	boolean	same as passive_checks_enabled
downtime_depth	short integer	number of active downtimes
display_name	string	name displayed in UI
enabled	boolean	enabled
event_handler	string	command executed when state changes
event_handler_enabled	boolean	event_handler enabled
execution_time	real	duration of last check
first_notification_delay	real	delay before notify in units (usually 60s)
flap_detection_enabled	boolean	flap detection enabled
flap_detection_on_down	boolean	down state is taken into account for flap detection
flap_detection_on_unreachable	boolean	unreachable state is taken into account for flap detection
flap_detection_on_up	boolean	up state is taken into account for flap detection
freshness_threshold	real	delay after check result is stale
has_been_checked	boolean	check has been executed at least once
high_flap_threshold	real	if percent state change is higher than this, host is considered flapping
host_id	unsigned integer	id of the host
host_name	string	name of the host
icon_image	string	icon displayed in the UI for the host
icon_image_alt	string	alternate string for icon_image
instance_id	unsigned integer	id of the poller that checks host
is_flapping	boolean	host is flapping
last_check	time	time of last check
last_hard_state	short integer	last hard state
last_hard_state_change	time	time of last hard state change
last_notification	time	time of last notification sent
last_state_change	time	time of last state change
last_time_down	time	time of the last failed check
last_time_unreachable	time	time of the last failed check with all parent hosts down
last_time_up	time	time of the last successful check
last_update	time	time of message create
latency	real	delay between scheduled check time and real check time
low_flap_threshold	real	if percent state change is lower than this, host is not considered flapping
max_check_attempts	short integer	number of failed check after witch host state become a hard fail state
next_check	time	next scheduled check time
next_notification	time	next renotification time
no_more_notifications	boolean	no other notification will be sent
notes	string	tooltip in resources status page
notes_url	string	clickable url in resources status page
notification_interval	real	interval between two notifications
notification_number	short integer	number of notifications sent since the start of the problem
notification_period	string	time period during witch notifications are allowed
notifications_enabled	boolean	notifications allowed
notify_on_down	boolean	users are notified if host becomes down
notify_on_downtime	boolean	users are notified if host enters in downtime
notify_on_flapping	boolean	users are notified if host is flapping
notify_on_recovery	boolean	users are notified if host becomes up
notify_on_unreachable	boolean	users are notified if host becomes down and parents are down
obsess_over	boolean	true if ocsp command if executed after check or notification command
passive_checks_enabled	boolean	passive check
percent_state_change	real	used by flapping and compared with high and low flap thresholds
retry_interval	real	interval between two check when host isn't in up state and state type is soft
should_be_scheduled	boolean	no next check should be scheduled
stalk_on_down	boolean	logs check output event changes if state is down
stalk_on_unreachable	boolean	logs check output event if state is unreachable
stalk_on_up	boolean	logs check output event if state is up
statusmap_image	string	image displayed in map
state_type	short integer	state soft 0 or hard 1
check_command	string	command executed
output	string	output of the command
perf_data	string	perfdata extracted from the command's output
retain_nonstatus_information	boolean	unused
retain_status_information	boolean	unused
timezone	string	time zone of the host

BBDO v3

NEB::PbHost

Category	element	ID
1	30	65566

This event is a Protobuf event so items are not serialized as in BBDO v2 events but using the Protobuf 3 serialization mechanism. When BBDO v3 is used, no more NEB::Host events should be sent, instead you should see NEB::PbHost events.

The protobuf message is the following:

enum AckType {
  NONE = 0;
  NORMAL = 1;
  STICKY = 2;
}

message TagInfo {
  uint64 id = 1;
  TagType type = 2;
}

message Host {
  uint64 host_id = 1;                     // Host ID.

  bool acknowledged = 2;                  // True if the problem has been acknowledged.
  AckType acknowledgement_type = 3;       // Acknowledgement type.

  bool active_checks = 4;                 // True if active checks are enabled.
  bool enabled = 5;                       // True if this host is enabled.
  int32 scheduled_downtime_depth = 6;     // Number of active downtimes.
  string check_command = 7;               // Check command.
  int32 check_interval = 8;               // Interval in units (usually 60s) between 2 checks.
  string check_period = 9;                // Time period when checks are authorized

  enum CheckType {
    ACTIVE = 0;
    PASSIVE = 1;
  }
  CheckType check_type = 10;              // Type of the last check.
  int32 check_attempt = 11;               // Number of failed checks.
  enum State {
    UP = 0;
    DOWN = 1;
    UNREACHABLE = 2;
  }
  State state = 12;                       // Current state.
  bool event_handler_enabled = 13;        // True if an event handler is configured on this host.
  string event_handler = 14;              // Command executed when state changes.
  double execution_time = 15;             // Duration of the last check.
  bool flap_detection = 16;               // True if flap detection is enabled.
  bool checked = 17;                      // check has been executed at least once.
  bool flapping = 18;                     // True if the host is flapping.
  int64 last_check = 19;                  // Timestamp of the last check.
  State last_hard_state = 20;             // Last hard state.
  int64 last_hard_state_change = 21;      // Timestamp of the last hard state change.
  int64 last_notification = 22;           // Timestamp of the last notification.
  int32 notification_number = 23;         // Current notification number or 0 if not.
  int64 last_state_change = 24;           // Timestamp of the last state change.
  int64 last_time_down = 25;              // Timestamp of the last failed check.
  int64 last_time_unreachable = 26;       // Timestamp of the last failed check with all parent hosts down.
  int64 last_time_up = 27;                // Timestamp of the last successful check.
  int64 last_update = 28;                 // Timestamp of the last message creation.
  double latency = 29;                    // Delay between scheduled check time and real check time.
  int32 max_check_attempts = 30;          // Number of failed check after which host state becomes a hard fail state.
  int64 next_check = 31;                  // Next scheduled check timestamp.
  int64 next_host_notification = 32;      // Next renotification timestamp.
  bool no_more_notifications = 33;        // If true, no other notification will be sent.
  bool notify = 34;                       // Notifications allowed
  string output = 35;                     // Output of the check command.
  bool passive_checks = 36;               // Passive checks are enabled.
  double percent_state_change = 37;       // Used by flapping and compared with high and low flap thresholds.
  string perfdata = 38;                   // perfdata extracted from the command's output.
  double retry_interval = 39;             // interval between two checks when host isn't in up state and state type is soft.
  bool should_be_scheduled = 40;          // True if next check should be scheduled
  bool obsess_over_host = 41;             // True if OCSP command is executed after check or notification command.

  enum StateType {
    SOFT = 0;                             // State not still confirmed.
    HARD = 1;                             // State confirmed.
  }

  StateType state_type = 42;              // The state type.
  string action_url = 43;                 // Optional url available in the WUI linked to this host.
  string address = 44;                    // An address
  string alias = 45;                      // An alias for this host.
  bool check_freshness = 46;              // Passive freshness check activated
  bool default_active_checks = 47;        // Same as active_checks but the default value.
  bool default_event_handler_enabled = 48;// Same as event_handler but the default value.
  bool default_flap_detection = 49;       // Same as flap_detection but the default value.
  bool default_notify = 50;               // Same as notify byt the default value.
  bool default_passive_checks = 51;       // Same as passive checks but the default value.
  string display_name = 52;               // Name displayed in the WUI
  double first_notification_delay = 53;   // Delay before notify in units (usually 60s).
  bool flap_detection_on_down = 54;       // Down state is taken into account for flap detection.
  bool flap_detection_on_unreachable = 55;// Unreachable state is taken into account for flap detection.
  bool flap_detection_on_up = 56;         // Up state is taken into account for flap detection.
  double freshness_threshold = 57;        // Delay after check result is stale.
  double high_flap_threshold = 58;        // If percent state change is higher than this, host is considered flapping.
  string name = 59;                       // Host name.
  string icon_image = 60;                 // Icon displayed in the WUI for the host.
  string icon_image_alt = 61;             // Alternative string for icon_image.
  int32 instance_id = 62;                 // Instance ID.
  double low_flap_threshold = 63;         // If percent state change is lower than this, host is not considered flapping.
  string notes = 64;                      // Tooltip in resources status page.
  string notes_url = 65;                  // clickable url in resources status page.
  double notification_interval = 66;      // Interval between two notifications.
  string notification_period = 67;        // Time period during which notifications are allowed.
  bool notify_on_down = 68;               // Users are notified if host becomes down.
  bool notify_on_downtime = 69;           // Users are notified if host enters in downtime.
  bool notify_on_flapping = 70;           // Users are notified if host is flapping.
  bool notify_on_recovery = 71;           // Users are notified if host becomes up.
  bool notify_on_unreachable = 72;        // Users are notified if host becomes unreachable.
  bool stalk_on_down = 73;                // Logs check output changes if state is down.
  bool stalk_on_unreachable = 74;         // Logs check output changes if state is unreachable.
  bool stalk_on_up = 75;                  // Logs check output changes if state is up.
  string statusmap_image = 76;            // Image displayed in map.
  bool retain_nonstatus_information = 77; // Unused
  bool retain_status_information = 78;    // Unused
  string timezone = 79;                   // Time zone of the host.
  uint64 severity_id = 80;                // Severity ID.
  repeated TagInfo tags = 81;             // Tags linked to this host.
  uint64 icon_id = 82;                    // Icon ID.
}

Host check

This type of event is emitted by Centreon Engine when a check is performed on a host.

BBDO v2

NEB::HostCheck

Category	element	ID
1	8	65544

The content of this message is serialized as follows:

Property	Type	Description
active_checks_enabled	boolean	True if active checks are enabled on the host.
check_type	short integer
host_id	unsigned integer	Host ID.
next_check	time	Time at which the next check is scheduled.
command_line	string	Check command line.
source_id	unsigned integer	The id of the source instance this event.
destination_id	unsigned integer	The id of the destination instance of this event.

BBDO v3

This event is emitted every time a change is made to the configuration of a host and the configuration is deployed.

Host dependency

This event is emitted when a dependency between hosts is defined, and the configuration is deployed.

BBDO v2

NEB::HostDependency

Category	element	ID
1	9	65545

The content of this message is serialized as follows:

Property	Type	Description	Version
dependency_period	string
dependent_host_id	unsigned integer
enabled	boolean
execution_failure_options	string
inherits_parent	boolean
host_id	unsigned integer
notification_failure_options	string

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Host group

This event is emitted when a host group is created.

BBDO v2

NEB::HostGroup

Category	element	ID
1	10	65546

The content of this message is serialized as follows:

Property	Type	Description	Version
host_group_id	unsigned integer	id of the group
name	string	Group name.
enabled	boolean	True if the group is enabled, false if it is not (deletion).
poller_id	unsigned integer	id of the poller

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Host group member

This is a configuration event. It is sent just after a hostgroup event to detail members of the group to configure. Even in BBDO v3, we still use the BBDO v2 version of this event.

BBDO v2

NEB::HostGroupMember

Category	element	ID
1	11	65547

The content of this message is serialized as follows:

Property	Type	Description
enabled	boolean	True if the membership is enabled, false if it is not (deletion).
group	string	Group name.
instance_id	unsigned integer	Instance ID.
host_id	unsigned integer	Host ID.
source_id	unsigned integer	The id of the source instance this event.
destination_id	unsigned integer	The id of the destination instance of this event.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Host parent

This is a configuration event sent when a host parent is defined. Even in BBDO v3, we still use the BBDO v2 version of this event.

BBDO v2

NEB::HostParent

Category	element	ID
1	13	65549

The content of this message is serialized as follows:

Property	Type	Description
enabled	boolean	True if parenting is enabled, false if it is not (deletion).
child_id	unsigned integer	Child host ID.
parent_id	unsigned integer	Parent host ID.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Host status

This is an event emitted by Centreon Engine when a host has real time modifications (status, output, metrics...).

BBDO v2

NEB::HostStatus

Category	element	ID
1	14	65550

The content of this message is serialized as follows:

Property	Type	Description
acknowledged	boolean	problem has been acknowledged
acknowledgement_type	short integer	0 none, 1 normal, 2 sticky
active_checks_enabled	boolean	True if active checks are enabled on the host.
check_interval	real	interval in units (usually 60s) between 2 checks
check_period	string	time period when checks are authorized
check_type	short integer	0 active, 1 passive
current_check_attempt	short integer	number of failed checks
current_state	short integer	0 up, 1 down, 2 unreachable
downtime_depth	short integer	number of active downtimes
enabled	boolean	enabled
event_handler	string	command executed when state changes
event_handler_enabled	boolean	event_handler enabled
execution_time	real	duration of last check
flap_detection_enabled	boolean	flap detection enabled
has_been_checked	boolean	check has been executed at least once
host_id	unsigned integer	id of the host
is_flapping	boolean	host is flapping
last_check	time	time of last check
last_hard_state	State	last hard state
last_hard_state_change	time	time of last hard state change
last_notification	time	time of last notification sent
last_state_change	time	time of last state change
last_time_down	time	time of the last failed check
last_time_unreachable	time	time of the last failed check with all parent hosts down
last_time_up	time	time of the last successful check
last_update	time	time of message create
latency	real	delay between scheduled check time and real check time
max_check_attempts	short integer	number of failed check after which host state become a hard fail state
next_check	time	Time at which the next check is scheduled.
next_host_notification	time	next renotification time
no_more_notifications	boolean	no other notification will be sent
notification_number	short integer	number of notifications sent since the start of the problem
notifications_enabled	boolean	notifications allowed
obsess_over	boolean	true if ocsp command if executed after check or notification command
passive_checks_enabled	boolean	passive check
percent_state_change	real	used by flapping and compared with high and low flap thresholds
retry_interval	real	interval between two check when host isn't in up state and state type is soft
should_be_scheduled	boolean	next check should be scheduled
state_type	StateType	SOFT HARD
check_command	string	command executed
output	string	output of the command
perf_data	string	perfdata extracted from the command's output

BBDO v3

NEB::PbHostStatus

Category	element	ID
1	32	65538

This event is a Protobuf event so items are not serialized as in BBDO v2 events but using the Protobuf 3 serialization mechanism. When BBDO v3 is used, no more NEB::HostStatus events should be sent, instead you should see NEB::PbHostStatus events.

Here is the definition of this protobuf event:

enum AckType {
  NONE = 0;
  NORMAL = 1;
  STICKY = 2;
}

message HostStatus {
  uint64 host_id = 1;                 // Host ID.

  bool checked = 2;                   // True if the host is checked.
  enum CheckType {
    ACTIVE = 0;
    PASSIVE = 1;
  }
  CheckType check_type = 3;           // Type of the last check (ACTIVE/PASSIVE).

  enum State {
    UP = 0;
    DOWN = 1;
    UNREACHABLE = 2;
  }
  State state = 4;                    // Current state of the host.
  enum StateType {
    SOFT = 0;
    HARD = 1;
  }
  StateType state_type = 5;           // Confirmed or not state (HARD/SOFT).
  int64 last_state_change = 6;        // Timestamp of the last state change.
  State last_hard_state = 7;          // Last hard state.
  int64 last_hard_state_change = 8;   // Timestamp of the last hard state.
  int64 last_time_up = 9;             // Timestamp of the last up state.
  int64 last_time_down = 10;          // Timestamp of the last down state.
  int64 last_time_unreachable = 11;   // Timestamp of the last unreachable state.

  string output = 12;                 // Check output.
  string long_output = 13;            // Check long output.
  string perfdata = 14;               // Performance data.

  bool flapping = 15;                 // True if the host is flapping.
  double percent_state_change = 16;   // Used by flapping and compared with high and low flap thresholds
  double latency = 17;                // Delay between scheduled check time and real check time.
  double execution_time = 18;         // Duration of last check.
  int64 last_check = 19;              // Timestamp of the last check.
  int64 next_check = 20;              // Timestamp at which the next check is scheduled.
  bool should_be_scheduled = 21;      // True if the next check should be scheduled.
  int32 check_attempt = 22;           // Number of failed checks.

  int32 notification_number = 23;     // Number of notifications sent since the start of the problem.
  bool no_more_notifications = 24;    // No other notification will be sent.
  int64 last_notification = 25;       // Timestamp of last notification sent.
  int64 next_host_notification = 26;  // Timestamp of next renotification.

  AckType acknowledgement_type = 27;  // One value of the AckType enum.
  int32 scheduled_downtime_depth = 28;// Number of active downtimes.
}

Instance

This event is emitted by Centreon Engine when Engine starts to send its configuration or when Engine stops.

BBDO v2

NEB::Instance

Category	element	ID
1	15	65551

The content of this message is serialized as follows:

Property	Type	Description
engine	string	Name of the monitoring engine used on this instance.
id	unsigned integer	Instance ID.
name	string	Instance name.
is_running	boolean	Whether or not this instance is running.
pid	unsigned integer	Monitoring engine PID.
program_end	time	Time at which the instance shut down.
program_start	time	Time at which the instance started.
version	string	Version of the monitoring engine used on this instance.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Instance status

This event is emitted by Centreon Engine regularly as a watchdog. This event tells Broker that the poller is still alive (with various other information).

BBDO v2

NEB::InstanceStatus

Category	element	ID
1	16	65552

The content of this message is serialized as follows:

Property	Type	Description	Version
active_host_checks_enabled	boolean	Whether or not active host checks are globally enabled.
active_service_checks_enabled	boolean	Whether or not active service checks are globally enabled.
check_hosts_freshness	boolean	Whether or not hosts freshness checking is globally enabled.
check_services_freshness	boolean	Whether or not services freshness checking is globally enabled.
event_handler_enabled	boolean	Whether or not event handlers are globally enabled.
flap_detection_enabled	boolean	Whether or not flap detection is globally enabled.
id	unsigned integer	Instance ID.
last_alive	time	Last time the instance was known alive.
last_command_check	time	Last time a check command was executed.
notifications_enabled	boolean	Whether or not notifications are globally enabled.
obsess_over_hosts	boolean	Whether or not the monitoring engine should obsess over hosts.
obsess_over_services	boolean	Whether or not the monitoring engine should obsess over services.
passive_host_checks_enabled	boolean	Whether or not passive host checks are globally enabled.
passive_service_checks_enabled	boolean	Whether or not passive service checks are globally enabled.
global_host_event_handler	string	Global host event handler.
global_service_event_handler	string	Global service event handler.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Log entry

Centreon Engine generates many logs. Some of them are sent to Centreon Broker to be stored into the database. These logs are sent using log entry events.

BBDO v2

NEB::LogEntry

Category	element	ID
1	17	65553

The content of this message is serialized as follows:

Property	Type	Description	Version
c_time	time	Log time.
host_id	unsigned integer	Host ID. 0 if log entry does not refer to a specific host or service.
host_name	string	Host name. Can be empty if log entry does not refer to a specific host or service.
instance_name	string	Instance name.
log_type	short integer	0 for SOFT, 1 for HARD.
msg_type	short integer	0 for SERVICE ALERT (sent on service state change), 1 for HOST ALERT (sent on host state change(, 2 for SERVICE NOTIFICATION (notification sent out for a service), 3 for HOST NOTIFICATION (notification sent out for a host), 4 for Warning (Centreon Engine warning), 5 for EXTERNAL COMMAND (external command received), 6 for CURRENT SERVICE STATE (current state of monitored service, usually sent at configuration reload), 7 for CURRENT HOST STATE (current state of monitored host, usually sent at configuration reload), 8 for INITIAL SERVICE STATE (initial state of service, after retention processing, sent at process start), 9 for INITIAL HOST STATE (initial state of monitored host, after retention processing, sent at process start), 10 for ACKNOWLEDGE_SVC_PROBLEM external command (special case of EXTERNAL COMMAND for service acknowledgement), 11 for ACKNOWLEDGE_HOST_PROBLEM external command (special case of EXTERNAL COMMAND for host acknowledgement).
notification_cmd	string	Notification command.
notification_contact	string	Notification contact.
retry	integer	Current check attempt.
service_description	string	Service description. Empty if log entry does not refer to a specific service.
service_id	unsigned integer	Service ID. 0 if log entry does not refer to a specific service.
status	short integer	Host / service status.
output	string	Output.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Module

Module events are generated when Centreon Broker modules get loaded or unloaded.

BBDO v2

NEB::Module

Category	element	ID
1	18	65554

The content of this message is serialized as follows:

Property	Type	Description	Version
args	string	Module arguments.
enabled	boolean	Whether or not this module is enabled.
filename	string	Path to the module file.
instance_id	unsigned integer	Instance ID.
loaded	boolean	Whether or not this module is loaded.
should_be_loaded	boolean	Whether or not this module should be (should have been) loaded.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Service

This is a configuration event. It is emitted by Centreon Engine when a change is made to the configuration of a service, and the configuration is deployed.

BBDO v2

NEB::Service

Category	element	ID
1	23	65559

The content of this message is serialized as follows:

Property	Type	Description
acknowledged	boolean	true if the problem has been acknowledged
acknowledgement_type	short integer	0 none, 1 normal, 2 sticky
action_url	string	url to obtain information about service
active_checks_enabled	boolean	active check
check_freshness	boolean	passive freshness check activated
check_interval	real	interval in units (usually 60s) between 2 checks
check_period	string	time period when checks are authorized
check_type	short integer	0 active, 1 passive
current_check_attempt	short integer	number of failed checks
current_state	short integer	0 up, 1 down, 2 unreachable
default_active_checks_enabled	boolean	same as active_checks_enabled
default_event_handler_enabled	boolean	same as event_handler_enabled
default_flap_detection_enabled	boolean	same as flap_detection_enabled
default_notifications_enabled	boolean	same as notifications_enabled
default_passive_checks_enabled	boolean	same as passive_checks_enabled
downtime_depth	short integer	number of active downtimes
display_name	string	name displayed in UI
enabled	boolean	enabled
event_handler	string	command executed when state changes
event_handler_enabled	boolean	event_handler enabled
execution_time	real	duration of last check
first_notification_delay	real	delay before notify in units (usually 60s)
flap_detection_enabled	boolean	flap detection enabled
flap_detection_on_critical	boolean	critical state is taken into account for flap detection
flap_detection_on_ok	boolean	ok state is taken into account for flap detection
flap_detection_on_unknown	boolean	unknown state is taken into account for flap detection
flap_detection_on_warning	boolean	warning state is taken into account for flap detection
freshness_threshold	real	delay after check result is stale
has_been_checked	boolean	check has been executed at least once
high_flap_threshold	real	if percent state change is higher than this, service is considered flapping
host_id	unsigned integer	id of the host
host_name	string	name of the host
icon_image	string	icon displayed in the UI for the service
icon_image_alt	string	alternate string for icon_image
service_id	unsigned integer	id of the service
is_flapping	boolean	service is flapping
is_volatile	boolean	service is volatile
last_check	time	time of last check
last_hard_state	short integer	last hard state
last_hard_state_change	time	time of last hard state change
last_notification	time	time of last notification sent
last_state_change	time	time of last state change
last_time_critical	time	time of the last check critical return code
last_time_ok	time	time of the last check ok return code
last_time_unknown	time	time of the last check unknown return code
last_time_warning	time	time of the last check warning return code
last_update	time	time of message create
latency	real	delay between scheduled check time and real check time
low_flap_threshold	real	if percent state change is lower than this, service is not considered flapping
max_check_attempts	short integer	number of failed check after which service state become a hard fail state
next_check	time	next scheduled check time
next_notification	time	next renotification time
no_more_notifications	boolean	no other notification will be sent
notes	string	tooltip in resources status page
notes_url	string	clickable url in resources status page
notification_interval	real	interval between two notifications
notification_number	short integer	number of notifications sent since the start of the problem
notification_period	string	time period during which notifications are allowed
notifications_enabled	boolean	notifications enabled
notify_on_critical	boolean	users are notified if service state becomes critical
notify_on_downtime	boolean	users are notified if service enters in downtime
notify_on_flapping	boolean	users are notified if service is flapping
notify_on_recovery	boolean	users are notified if service becomes ok
notify_on_unknown	boolean	users are notified if service state becomes unknown
notify_on_warning	boolean	users are notified if service state becomes warning
obsess_over	boolean	true if ocsp command if executed after check or notification command
passive_checks_enabled	boolean	passive check
percent_state_change	real	used by flapping and compared with high and low flap thresholds
retry_interval	real	interval between two check when service isn't in up state and state type is soft
scheduled_downtime_depth	short integer	number of active downtimes
service_description	string	name of the service
should_be_scheduled	boolean	no next check should be scheduled
stalk_on_critical	boolean	logs check output event change if state is critical
stalk_on_ok	boolean	logs check output event change if state is ok
stalk_on_unknown	boolean	logs check output event change if state is unknown
stalk_on_warning	boolean	logs check output event change if state is warning
state_type	short integer	state soft 0 or hard 1
check_command	string	command executed
output	string	output of the command
perf_data	string	perfdata extracted from the command's output
retain_nonstatus_information	boolean	unused
retain_status_information	boolean	unused

BBDO v3

NEB::PbService

Category	element	ID
1	27	65563

This event is a Protobuf event so items are not serialized as in BBDO v2 events but using the Protobuf 3 serialization mechanism. When BBDO v3 is used, no more NEB::Service events should be sent, instead you should see NEB::PbService events.

Here is the definition of this protobuf event:

enum ServiceType {
  SERVICE = 0;
  METASERVICE = 2;
  BA = 3;
  ANOMALY_DETECTION = 4;
}

enum AckType {
  NONE = 0;
  NORMAL = 1;
  STICKY = 2;
}

message Service {
  uint64 host_id = 1;                         // Host ID.
  uint64 service_id = 2;                      // Service ID.

  bool acknowledged = 3;                      // Is it currently acknowledged?
  AckType acknowledgement_type = 4;           // AckType value.

  bool active_checks = 5;                     // Are active checks enabled?
  bool enabled = 6;                           // Is this service active?
  int32 scheduled_downtime_depth = 7;         // Number of active downtimes.
  string check_command = 8;                   // Command executed.
  uint32 check_interval = 9;                  // Interval in units (usually 60s) between 2 checks.
  string check_period = 10;                   // Time period when checks are authorized.

  enum CheckType {
    ACTIVE = 0;
    PASSIVE = 1;
  }
  CheckType check_type = 11;                  // CheckType value.
  int32 check_attempt = 12;                   // Number of failed checks.
  enum State {
    OK = 0;
    WARNING = 1;
    CRITICAL = 2;
    UNKNOWN = 3;
    PENDING = 4;
  }
  State state = 13;                           // Current state of this service.
  bool event_handler_enabled = 14;            // Event handler enabled?
  string event_handler = 15;                  // Command executed when state changes.
  double execution_time = 16;                 // Duration of last check.
  bool flap_detection = 17;                   // Is flap detection enabled?
  bool checked = 18;                          // Is this service checked?
  bool flapping = 19;                         // Is this service flapping?
  int64 last_check = 20;                      // Timestamp of the last check.
  State last_hard_state = 21;                 // Last hard state.
  int64 last_hard_state_change = 22;          // Timestamp of the last hard state change.
  int64 last_notification = 23;               // Timestamp of the last notification.
  int32 notification_number = 24;             // Number of notifications sent since the start of the problem.
  int64 last_state_change = 25;               // Timestamp of the last state change.
  int64 last_time_ok = 26;                    // Timestamp of the last check OK return code.
  int64 last_time_warning = 27;               // Timestamp of the last check WARNING return code.
  int64 last_time_critical = 28;              // Timestamp of the last check CRITICAL return code.
  int64 last_time_unknown = 29;               // Timestamp of the last check UNKNOWN return code.
  int64 last_update = 30;                     // Timestamp of this event creation.
  double latency = 31;                        // Delay between scheduled check time and real check time.
  uint32 max_check_attempts = 32;             // Number of failed checks after which service state becomes a hard fail state.
  int64 next_check = 33;                      // Next scheduled check timestamp.
  int64 next_notification = 34;               // Next notification timestamp.
  bool no_more_notifications = 35;            // No other notification will be sent.
  bool notify = 36;                           // Are notifications enabled on this service?
  string output = 37;                         // Output of the check command.
  string long_output = 38;                    // Long output of the check command.
  bool passive_checks = 39;                   // Are passive checks enabled?
  double percent_state_change = 40;           // Used by flapping and compared with high and low flap thresholds.
  string perfdata = 41;                       // Perfdata extracted from the command's output.
  double retry_interval = 42;                 // Interval between two checks when service isn't in ok state and state type is SOFT.
  string host_name = 43;                      // Host name of this service.
  string description = 44;                    // Description of this service
  bool should_be_scheduled = 45;              // Is there a next check scheduled?
  bool obsess_over_service = 46;              // True if OCSP command is executed after check or notification command.

  enum StateType {
    SOFT = 0;
    HARD = 1;
  }

  StateType state_type = 47;                  // StateType value.
  string action_url = 48;                     // Url to obtain information about this service.
  bool check_freshness = 49;                  // Passive freshness check activated?
  bool default_active_checks = 50;            // Default value of active_checks.
  bool default_event_handler_enabled = 51;    // Default value of event_handler_enabled.
  bool default_flap_detection = 52;           // Default value of flap detection.
  bool default_notify = 53;                   // Default value of notify.
  bool default_passive_checks = 54;           // Default value of passive checks.
  string display_name = 55;                   // Name displayed in WUI.
  double first_notification_delay = 56;       // Delay before notify in units (usually 60s).
  bool flap_detection_on_critical = 57;       // Critical state is taken into account for flap detection.
  bool flap_detection_on_ok = 58;             // Ok state is taken into account for flap detection.
  bool flap_detection_on_unknown = 59;        // Unknown state is taken into account for flap detection.
  bool flap_detection_on_warning = 60;        // Warning state is taken into account for flap detection.
  double freshness_threshold = 61;            // Delay after check result is stale.
  double high_flap_threshold = 62;            // If percent state change is higher than this, service is considered flapping.
  string icon_image = 63;                     // Icon displayed in the WUI for the service.
  string icon_image_alt = 64;                 // Alternate string for icon_image.
  bool is_volatile = 65;                      // Is the service volatile?
  double low_flap_threshold = 66;             // If percent state change is lower than this, service is not considered flapping.
  string notes = 67;                          // Tooltip in resources status page.
  string notes_url = 68;                      // Clickable url in resources status page.
  double notification_interval = 69;          // Interval between two notifications.
  string notification_period = 70;            // Time period during which notifications are allowed.
  bool notify_on_critical = 71;               // Users are notified if service state becomes critical.
  bool notify_on_downtime = 72;               // Users are notified if service enters in downtime.
  bool notify_on_flapping = 73;               // Users are notified if service is flapping.
  bool notify_on_recovery = 74;               // Users are notified if service becomes OK.
  bool notify_on_unknown = 75;                // Users are notified if service state becomes unknown.
  bool notify_on_warning = 76;                // Users are notified if service state becomes warning.
  bool stalk_on_critical = 77;                // Users are notified if service state becomes critical.
  bool stalk_on_ok = 78;                      // Logs check output event change if state is OK.
  bool stalk_on_unknown = 79;                 // Logs check output event change if state is unknown.
  bool stalk_on_warning = 80;                 // Logs check output event change if state is warning.
  bool retain_nonstatus_information = 81;     // unused.
  bool retain_status_information = 82;        // unused.
  uint64 severity_id = 83;                    // Severity ID or 0.
  repeated TagInfo tags = 84;                 // Tag IDs.

  ServiceType type = 85;                      // What kind of service is it?

  /* In case of metaservice and ba, they also have an internal id. We keep it
   * here. */
  uint64 internal_id = 86;                    // ID of metaservice or ba.
  uint64 icon_id = 87;                        // Icon ID.
}

Service check

This event is emitted by Centreon Engine when a check is performed on a service.

BBDO v2

NEB::ServiceCheck

Category	element	ID
1	19	65555

The content of this message is serialized as follows:

Property	Type	Description	Version
active_checks_enabled	boolean	True if active checks are enabled on the service.
check_type	short
host_id	unsigned integer	Host ID.
next_check	time	Time at which the next check is scheduled.
service_id	unsigned integer	Service ID.
command_line	string	Check command line.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Service dependency

This is a configuration event sent when a dependency between services is defined.

BBDO v2

NEB::ServiceDependency

Category	element	ID
1	20	65556

The content of this message is serialized as follows:

Property	Type	Description	Version
dependency_period	string
dependent_host_id	unsigned integer
dependent_service_id	unsigned integer
enabled	boolean
execution_failure_options	string
host_id	unsigned integer
inherits_parent	boolean
notification_failure_options	string
service_id	unsigned integer

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Service group

This is a configuration event that is emitted when a service group is created.

BBDO v2

NEB::ServiceGroup

Category	element	ID
1	21	65557

The content of this message is serialized as follows:

Property	Type	Description	Version
id	unsigned integer
name	string	Group name.
enabled	enabled	True if the group is enable, false if it is not (deletion).
poller_id	unsigned integer

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Service group member

This is a configuration event. It is sent just after a servicegroup event to detail members of the group to configure. Even in BBDO v3, we still use the BBDO v2 version of this event.

BBDO v2

NEB::ServiceGroupMember

Category	element	ID
1	22	65558

The content of this message is serialized as follows:

Property	Type	Description
id	unsigned integer
host_id	unsigned integer
service_id	unsigned integer
enabled	enabled	True if the group is enable, false if it is not (deletion).
group_name	string	Group name.
poller_id	unsigned integer

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Service status

This is an event emitted by Centreon Engine when a service has real time modifications.

BBDO v2

NEB::ServiceStatus

Category	element	ID
1	24	65560

The content of this message is serialized as follows:

Property	Type	Description
acknowledged	boolean	true if the problem has been acknowledged
acknowledgement_type	short integer	0 none, 1 normal, 2 sticky
active_checks_enabled	boolean	active check
check_interval	real	interval in units (usually 60s) between 2 checks
check_period	string	time period when checks are authorized
check_type	short integer	0 active, 1 passive
current_check_attempt	short integer	number of failed checks
current_state	short integer	0 up, 1 down, 2 unreachable
downtime_depth	short integer	number of active downtimes
enabled	boolean	enabled
event_handler	string	command executed when state changes
event_handler_enabled	boolean	event_handler enabled
execution_time	real	duration of last check
flap_detection_enabled	boolean	flap detection enabled
has_been_checked	boolean	check has been executed at least once
host_id	unsigned integer	id of the host
host_name	string	name of the host
is_flapping	boolean	service is flapping
last_check	time	time of last check
last_hard_state	short integer	last hard state
last_hard_state_change	time	time of last hard state change
last_notification	time	time of last notification sent
last_state_change	time	time of last state change
last_time_critical	time	time of the last check critical return code
last_time_ok	time	time of the last check ok return code
last_time_unknown	time	time of the last check unknown return code
last_time_warning	time	time of the last check warning return code
last_update	time	time of message create
latency	real	delay between scheduled check time and real check time
max_check_attempts	short integer	number of failed check after which service state become a hard fail state
next_check	time	next scheduled check time
next_notification	time	next renotification time
no_more_notifications	boolean	no other notification will be sent
notification_number	short integer	number of notifications sent since the start of the problem
notifications_enabled	boolean	notifications enabled
obsess_over	boolean	true if ocsp command if executed after check or notification command
passive_checks_enabled	boolean	passive check
percent_state_change	real	used by flapping and compared with high and low flap thresholds
retry_interval	real	interval between two check when service isn't in up state and state type is soft
service_description	string	name of the service
service_id	unsigned integer	id of the service
should_be_scheduled	boolean	no next check should be scheduled
state_type	short integer	state soft 0 or hard 1
check_command	string	command executed
output	string	output of the command
perf_data	string	perfdata extracted from the command's output

BBDO v3

NEB::PbServiceStatus

Category	element	ID
1	29	65565

This event is a Protobuf event so items are not serialized as in BBDO v2 events but using the Protobuf 3 serialization mechanism. When BBDO v3 is used, no more NEB::ServiceStatus events should be sent, instead you should see NEB::PbServiceStatus.

Here is the definition of this protobuf event:

message ServiceStatus {
  uint64 host_id = 1;                         // Host ID.
  uint64 service_id = 2;                      // Service ID.

  bool checked = 3;                          // Is this service checked?
  enum CheckType {
    ACTIVE = 0;
    PASSIVE = 1;
  }
  CheckType check_type = 4;                  // CheckType value.

  enum State {
    OK = 0;
    WARNING = 1;
    CRITICAL = 2;
    UNKNOWN = 3;
    PENDING = 4;
  }
  State state = 5;                           // Current state of this service.
  enum StateType {
    SOFT = 0;
    HARD = 1;
  }
  StateType state_type = 6;                  // StateType value.
  int64 last_state_change = 7;               // Timestamp of the last state change.
  State last_hard_state = 8;                 // Last hard state.
  int64 last_hard_state_change = 9;          // Timestamp of the last hard state change.
  int64 last_time_ok = 10;                   // Timestamp of the last check OK return code.
  int64 last_time_warning = 11;              // Timestamp of the last check WARNING return code.
  int64 last_time_critical = 12;             // Timestamp of the last check CRITICAL return code.
  int64 last_time_unknown = 13;              // Timestamp of the last check UNKNOWN return code.

  string output = 14;                        // Output of the check command.
  string long_output = 15;                   // Long output of the check command.
  string perfdata = 16;                      // Perfdata extracted from the command's output.

  bool flapping = 17;                        // Is this service flapping?
  double percent_state_change = 18;          // Used by flapping and compared with high and low flap thresholds.
  double latency = 19;                       // Delay between scheduled check time and real check time.
  double execution_time = 20;                // Duration of last check.
  int64 last_check = 21;                     // Timestamp of the last check.
  int64 next_check = 22;                     // Next scheduled check timestamp.
  bool should_be_scheduled = 23;             // Is there a next check scheduled?
  int32 check_attempt = 24;                  // Number of failed checks after which service state becomes a hard fail state.

  int32 notification_number = 25;            // Number of notifications sent since the start of the problem.
  bool no_more_notifications = 26;           // No other notification will be sent.
  int64 last_notification = 27;              // Timestamp of the last notification.
  int64 next_notification = 28;              // Next notification timestamp.

  AckType acknowledgement_type = 29;         // AckType value.
  int32 scheduled_downtime_depth = 30;       // Number of active downtimes.

  ServiceType type = 31;                     // What kind of service is it?

  /* In case of metaservice and ba, they also have an internal id. We keep it
   * here. */
  uint64 internal_id = 32;                   // ID of metaservice or ba.
}

Instance configuration

Here is a configuration event announcing all the configuration events that are going to be sent by a poller.

BBDO v2

NEB::InstanceConfiguration

Category	element	ID
1	25	65561

The content of this message is serialized as follows:

Property	Type	Description	Version
loaded	boolean	True if the instance loaded successfully.
poller_id	unsigned integer	ID of the poller which received a configuration update request (reload).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Responsive instance

This event is emitted by cbd. It tells if a poller is responsive or not.

BBDO v2

NEB::ResponsiveInstance

Category	element	ID
1	26	65562

The content of this message is serialized as follows:

Property	Type	Description	Version
poller_id	unsigned integer	ID of the poller which received a configuration update request (reload).
responsive	boolean	A boolean telling if the poller with ID poller_id is responsive or not.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Adaptive service

This event was introduced with BBDO v3. It is emitted when a service has its configuration updated on the fly (for example with an external command)

BBDO v2

No Adaptive service available in BBDO v2.

BBDO v3

NEB::PbAdaptiveService

Category	element	ID
1	41	65577

This event is a Protobuf event so items are not serialized as in BBDO v2 events but using the Protobuf 3 serialization mechanism. When BBDO v3 is used, no more NEB::AdaptiveService events should be sent, instead you should see NEB::PbAdaptiveService events.

The protobuf message is the following:

message AdaptiveService {
  uint64 host_id = 1;                         // Host ID.
  uint64 service_id = 2;                      // Service ID.

  optional bool notify = 3;                   // Are notifications enabled on this service?
  optional bool active_checks = 4;            // Are active checks enabled?
  optional bool should_be_scheduled = 5;      // Is there a next check scheduled?
  optional bool passive_checks = 6;           // Are passive checks enabled?
  optional bool event_handler_enabled = 7;    // Event handler enabled?
  optional bool flap_detection_enabled = 8;   // Is flap detection enabled?
  optional bool obsess_over_service = 9;      // True if OCSP command is executed after check or notification command.
  optional string event_handler = 10;         // Command executed when state changes.
  optional string check_command = 11;         // Command executed.
  optional uint32 check_interval = 12;        // Interval in units (usually 60s) between 2 checks.
  optional uint32 retry_interval = 13;        // Interval between two checks when service isn't in ok state and state type is SOFT.
  optional uint32 max_check_attempts  = 14;   // Number of failed checks after which service state becomes a hard fail state.
  optional bool check_freshness = 15;         // Passive freshness check activated?
  optional string check_period = 16;          // Time period when checks are authorized.
  optional string notification_period = 17;   // Time period when notifications are authorized.
}

Adaptive host

This event was introduced with BBDO v3. It is emitted when a host has its configuration updated on the fly (for example with an external command).

BBDO v2

No Adaptive host available in BBDO v2.

BBDO v3

NEB::PbAdaptiveHost

Category	element	ID
1	31	65567

This event is a Protobuf event so items are not serialized as in BBDO v2 events but using the Protobuf 3 serialization mechanism. When BBDO v3 is used, no more NEB::AdaptiveHost events should be sent, instead you should see NEB::PbAdaptiveHost events.

The protobuf message is the following:

message AdaptiveHost {
  uint64 host_id = 1;                         // Host ID.

  optional bool notify = 2;                   // Are notifications enabled on this service?
  optional bool active_checks = 3;            // Are active checks enabled?
  optional bool should_be_scheduled = 4;      // Is there a next check scheduled?
  optional bool passive_checks = 5;           // Are passive checks enabled?
  optional bool event_handler_enabled = 6;    // Event handler enabled?
  optional bool flap_detection = 7;           // Is flap detection enabled?
  optional bool obsess_over_host = 8;         // True if OCSP command is executed after check or notification command.
  optional string event_handler = 9;          // Command executed when state changes.
  optional string check_command  = 10;        // Command executed.
  optional uint32 check_interval  = 11;       // Interval in units (usually 60s) between 2 checks.
  optional uint32 retry_interval  = 12;       // Interval between two checks when service isn't in ok state and state type is SOFT.
  optional uint32 max_check_attempts  = 13;   // Number of failed checks after which service state becomes a hard fail state.
  optional bool check_freshness = 14;         // Passive freshness check activated?
  optional string check_period  = 15;         // Time period when checks are authorized.
  optional string notification_period  = 16;  // Time period when notifications are authorized.
}

Severity

This is a configuration event. It defines a severity. This event was introduced with BBDO v3.

BBDO v2

No BBDO v2 version of this event exists.

BBDO v3

NEB::PbSeverity

Category	element	ID
1	33	65569

This event comes with BBDO 3. It contains the severity of a resource.

Here is the definition of this protobuf event:

message Severity {
  uint64 id = 1;
  enum Action {
    ADD = 0;
    DELETE = 1;
    MODIFY = 2;
  }
  Action action = 2;
  uint32 level = 3;
  uint64 icon_id = 4;
  string name = 5;
  enum Type {
    SERVICE = 0;
    HOST = 1;
  }
  Type type = 6;
  uint64 poller_id = 7;
}

Tag

This event comes with BBDO 3. It is used to associate a tag to a resource. There are four types of tag, SERVICEGROUP, HOSTGROUP, SERVICECATEGORY, HOSTCATEGORY. A tag is not associated with a poller, but we must know for internal handling which poller sent the tag, that is why there is a poller_id item in the message.

BBDO v2

No BBDO v2 version of this event exists.

BBDO v3

NEB::PbTag

Category	element	ID
1	33	65570

The protobuf message is the following:

enum TagType {
  SERVICEGROUP = 0;
  HOSTGROUP = 1;
  SERVICECATEGORY = 2;
  HOSTCATEGORY = 3;
}

message Tag {
  uint64 id = 1;
  enum Action {
    ADD = 0;
    DELETE = 1;
    MODIFY = 2;
  }

  Action action = 2;
  TagType type = 3;
  string name = 4;
  int64 poller_id = 5;
}

Storage

Metric

This event is generated by a Storage endpoint to notify that a RRD metric graph should be updated.

BBDO v2

Storage::Metric

Category	element	ID
3	1	196609

The content of this message is serialized as follows:

Property	Type	Description	Version
ctime	time	Time at which the metric value was generated.
interval	unsigned integer	Normal service check interval in seconds.
metric_id	unsigned integer	Metric ID (from the metrics table).
name	string	Metric name.
rrd_len	integer	RRD retention length in seconds.
value	real	Metric value.
value_type	short integer	Metric type (1 =3D counter, 2 =3D derive, 3 =3D absolute, other =3D gauge).
is_for_rebuild	boolean	Set to true when a graph is being rebuild (see the rebuild event).
host_id	unsigned integer	The id of the host this metric is attached to.
service_id	unsigned integer	The id of the service this metric is attached to.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Rebuild

Rebuild events are generated when a Storage endpoint detects that some graph should be rebuild. It first sends a rebuild start event (end =3D false), then metric values (metric event with is_for_rebuild set to true) and finally a rebuild end event (end =3D true).

BBDO v2

Storage::Rebuild

Category	element	ID
3	2	196610

The content of this message is serialized as follows:

Property	Type	Description	Version
end	boolean	End flag. Set to true if rebuild is starting, false if it is ending.
id	unsigned integer	ID of metric to rebuild if is_index is false, or ID of index to rebuild (status graph) if is_index is true.
is_index	boolean	Index flag. Rebuild index (status) if true, rebuild metric if false.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Remove graph

A Storage endpoint generates a remove graph event when some graph must be deleted.

BBDO v2

Storage::RemoveGraph

Category	element	ID
3	3	196611

The content of this message is serialized as follows:

Property	Type	Description	Version
id	unsigned integer	Index ID (is_index =3D true) or metric ID (is_index =3D false) to remove.
is_index	boolean	Index flag. If true, a index (status) graph will be deleted. If false, a metric graph will be deleted.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Status

This event is emitted by cbd when a Service Status or a Host Status event is received. It essentially contains a resource with its status.

BBDO v2

Storage::Status

Category	element	ID
3	4	196612

The content of this message is serialized as follows:

Property	Type	Description	Version
ctime	time	Time at which the status was generated.
index_id	unsigned integer	Index ID.
interval	unsigned integer	Normal service check interval in seconds.
rrd_len	time	RRD retention in seconds.
state	short integer	Service state.
is_for_rebuild	boolean	Set to true when a graph is being rebuild (see the rebuild event).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Metric mapping

This event is emitted by Centreon Broker when a new service configuration is received. It associates an index ID (the one created for a service - see Index mapping) to a metric ID.

BBDO v2

Storage::MetricMapping

Category	element	ID
3	6	196614

The content of this message is serialized as follows:

Property	Type	Description	Version
index_id	unsigned integer	Index ID.
metric_d	unsigned integer	Index ID.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Index mapping

This event is emitted by Centreon Broker when a new service configuration is received. It associates an ID to the pair (host ID/service ID). This new ID is useful for the service metrics declaration.

BBDO v2

Storage::IndexMapping

Category	element	ID
3	5	196613

The content of this message is serialized as follows:

Property	Type	Description	Version
index_id	unsigned integer	Index ID.
host_id	unsigned integer	Index ID.
service_id	unsigned integer	Index ID.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Rebuild Message

This event comes with BBDO 3, when some graphs have to be rebuilt. Messages handling these rebuilds are of that type. They replace the old BBDO v2 rebuild message.

BBDO v2

Not available with BBDO v2.

See Storage::Rebuild

BBDO v3

Storage::PbRebuildMessage

Category	element	ID
3	7	196615

There are three states for this message:

• START: here is the first state, this message initializes which metrics have to be rebuilt.
• DATA: once the START state has been sent, one or more messages with DATA state may be sent to the RRD broker.
• END: When all the rebuild events have been sent, this one is sent to close the rebuilds. And the RRD broker falls back into a nominal state.

The protobuf message is the following:

message Point {
  int64 ctime = 1;
  double value = 2;
}

message Timeserie {
  repeated Point pts = 1;
  int32 data_source_type = 2;
  uint32 check_interval = 3;
  uint32 rrd_retention = 4;
}

message RebuildMessage {
  enum State {
    START = 0;
    DATA = 1;
    END = 2;
  }
  State state = 1;
  /* Only used on DATA state */
  map<uint64, Timeserie> timeserie = 2;

  /* Only used on START/END state */
  repeated uint64 metric_id = 3;
}

Remove Graph Message

This event comes with BBDO 3. When we want to remove graph files, we can use the centengine gRPC API and this call makes cbd generate a Storage::PbRemoveGraphMessage event. There are two possibilities concerning this event. We can remove graphs matching some index data or graphs matching some metric data. It is also possible to mix the two kinds.

BBDO v2

Not available with BBDO v2.

See Storage::RemoveGraph

BBDO v3

Storage::PbRemoveGraphMessage

Category	element	ID
3	8	196616

Here is the definition of this protobuf event:

message RemoveGraphMessage {
  repeated uint64 index_ids = 1;
  repeated uint64 metric_ids = 2;
}

BBDO

Version response

This is the negociation message. Each time a BBDO connection is established, this message is sent by the connector and by the acceptor to negociate options.

BBDO v2

BBDO::VersionResponse

Category	element	ID
2	1	131073

The content of this message is serialized as follows:

Property	Type	Description	Version
bbdo_major	short integer	BBDO protocol major used by the peer sending this version_response packet. The sole current protocol version is 1.0.0.
bbdo_minor	short integer	BBDO protocol minor used by the peer sending this version_response packet.
bbdo_patch	short integer	BBDO protocol patch used by the peer sending this version_response packet.
extensions	string	Space-separated string of extensions supported by the peer sending this version_response packet.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Ack

Usually, a BBDO sender sends events and a BBDO receiver consumes events. But the sender keeps events until the receiver tells it they have been handled. To do that, the receiver emits an Ack message with the number of events already handled.

BBDO v2

BBDO::Ack

Category	element	ID
2	2	131074

The content of this message is serialized as follows:

Property	Type	Description	Version
acknowledged events	unsigned integer	Number of acknowledged events. Only used by "smart" clients (i.e able to acknowledge events). Not to be used by dumb clients.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Stop

When one side of a BBDO connection is going to exit, it emits a Stop event so that if the other side has events already handled it can send an Ack event.

BBDO v2

BBDO::Stop

Category	element	ID
2	3	131075

The content of this message is empty.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

BAM

BA status event

This event is sent when a BA's status changed.

BBDO v2

BAM::BaStatus

Category	element	ID
6	1	393217

The content of this message is serialized as follows:

Property	Type	Description	Version
ba_id	unsigned integer	The id of the BA.	Since 2.8.0 (BBDO 1.2.0).
in_downtime	boolean	True of the BA is in downtime.	Since 2.8.0 (BBDO 1.2.0).
last_state_change	time	The time of the last state change of the BA.	Since 2.8.0 (BBDO 1.2.0).
level_acknowledgement	real	The acknowledgment level of the BA.	Since 2.8.0 (BBDO 1.2.0).
level_downtime	real	The downtime level of the BA.	Since 2.8.0 (BBDO 1.2.0).
level_nominal	real	The nominal level of the BA.	Since 2.8.0 (BBDO 1.2.0).
state	short integer	The state of the BA.	Since 2.8.0 (BBDO 1.2.0).
state_changed	boolean	True if the state of the BA just changed.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

KPI status event

This event is sent when a KPI's status changed.

BBDO v2

Category	element	ID
6	2	393218

The content of this message is serialized as follows:

Property	Type	Description	Version
kpi_id	unsigned integer	The id of the KPI.	Since 2.8.0 (BBDO 1.2.0).
in_downtime	bool	True if the KPI is in downtime.
level_acknowledgement_hard	real	The hard acknowledgement level of the KPI.	Since 2.8.0 (BBDO 1.2.0).
level_acknowledgement_soft	real	The soft acknowledgement level of the KPI.	Since 2.8.0 (BBDO 1.2.0).
level_downtime_hard	real	The hard downtime level of the KPI.	Since 2.8.0 (BBDO 1.2.0).
level_downtime_soft	real	The soft downtime level of the KPI.	Since 2.8.0 (BBDO 1.2.0).
level_nominal_hard	real	The hard nominal level of the KPI.	Since 2.8.0 (BBDO 1.2.0).
level_nominal_soft	real	The soft nominal level of the KPI.	Since 2.8.0 (BBDO 1.2.0).
state_hard	short integer	The hard state of the KPI.	Since 2.8.0 (BBDO 1.2.0).
state_soft	short integer	The soft state of the KPI.	Since 2.8.0 (BBDO 1.2.0).
last_state_change	time	The time of the last state change of the KPI.	Since 2.8.0 (BBDO 1.2.0).
last_impact	real	The last impact of the KPI.	Since 2.8.0 (BBDO 1.2.0).
valid	bool	True if the KPi is valid.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Meta service status event

This event is sent when a meta service's status changed.

BBDO v2

BAM::MetaServiceStatus

Category	element	ID
6	3	393219

The content of this message is serialized as follows:

Property	Type	Description	Version
meta_service_id	unsigned integer	The id of the meta service.	Since 2.8.0 (BBDO 1.2.0).
value	real	The value of the meta service.	Since 2.8.0 (BBDO 1.2.0).
state_changed	boolean	True if the state just changed.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

BA-event event

This event is sent when a new BA event is opened, or an old one is closed.

BBDO v2

BAM::BaEvent

Category	element	ID
6	4	393220

The content of this message is serialized as follows:

Property	Type	Description	Version
ba_id	unsigned integer	The id of the BA.	Since 2.8.0 (BBDO 1.2.0).
first_level	real	The first level of the BA event.	Since 2.8.0 (BBDO 1.2.0).
end_time	time	The end_time of the event. 0 or (time)-1 for an opened event.	Since 2.8.0 (BBDO 1.2.0).
in_downtime	boolean	True if BA was in downtime during the BA event.	Since 2.8.0 (BBDO 1.2.0).
start_time	time	The start_time of the event.	Since 2.8.0 (BBDO 1.2.0).
status	short integer	The status of the BA during the event.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

KPI-event event

This event is sent when a new KPI event is opened, or an old one is closed.

BBDO v2

BAM::KpiEvent

Category	element	ID
6	5	393221

The content of this message is serialized as follows:

Property	Type	Description	Version
kpi_id	unsigned integer	The id of the KPI.	Since 2.8.0 (BBDO 1.2.0).
end_time	time	The end_time of the event. 0 or (time)-1 for an opened event.	Since 2.8.0 (BBDO 1.2.0).
impact_level	integer	The level of the impact.	Since 2.8.0 (BBDO 1.2.0).
in_downtime	boolean	True if BA was in downtime during the BA event.	Since 2.8.0 (BBDO 1.2.0).
first_output	string	The first output of the KPI during the event.	Since 2.8.0 (BBDO 1.2.0).
perfdata	string	The first perfdata of the KPI during the event.	Since 2.8.0 (BBDO 1.2.0).
start_time	time	The start_time of the event.	Since 2.8.0 (BBDO 1.2.0).
status	short integer	The status of the BA during the event.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

BA duration event event

This event is sent when a new BA duration event is computed by BAM broker.

BBDO v2

BAM::BaDurationEvent

Category	element	ID
6	6	393222

The content of this message is serialized as follows:

Property	Type	Description	Version
ba_id	unsigned integer	The id of the BA.	Since 2.8.0 (BBDO 1.2.0).
real_start_time	time	The first level of the BA event.	Since 2.8.0 (BBDO 1.2.0).
end_time	time	The end_time of the event, in the given timeperiod.	Since 2.8.0 (BBDO 1.2.0).
start_time	time	The start_time of the event, in the given timeperiod.	Since 2.8.0 (BBDO 1.2.0).
duration	unsigned integer	end_time - start_time.	Since 2.8.0 (BBDO 1.2.0).
sla_duration	unsigned integer	The duration of the event in the given timperiod.	Since 2.8.0 (BBDO 1.2.0).
timeperiod_is_default	boolean	True if the timeperiod if the default for this BA.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Dimension BA

This event is part of the dimension (i.e configuration) dump occuring at startup and after each BAM configuration reload.

BBDO v2

BAM::DimensionBaEvent

Category	element	ID
6	7	393223

The content of this message is serialized as follows:

Property	Type	Description	Version
ba_id	unsigned integer	The id of the BA.	Since 2.8.0 (BBDO 1.2.0).
ba_name	string	The name of the BA.	Since 2.8.0 (BBDO 1.2.0).
ba_description	string	The description of the BA.	Since 2.8.0 (BBDO 1.2.0).
sla_month_percent_crit	real		Since 2.8.0 (BBDO 1.2.0).
sla_month_percent_warn	real		Since 2.8.0 (BBDO 1.2.0).
sla_month_duration_crit	unsigned integer		Since 2.8.0 (BBDO 1.2.0).
sla_month_duration_warn	unsigned integer		Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Dimension KPI

This event is part of the dimension (i.e configuration) dump occuring at startup and after each BAM configuration reload.

BBDO v2

BAM::DimensionKpiEvent

Category	element	ID
6	8	393224

The content of this message is serialized as follows:

Property	Type	Description	Version
kpi_id	unsigned integer	The id of the KPI.	Since 2.8.0 (BBDO 1.2.0).
ba_id	unsigned integer	The id of the parent BA of this KPI.	Since 2.8.0 (BBDO 1.2.0).
ba_name	string	The name of the parent BA of this KPI.	Since 2.8.0 (BBDO 1.2.0).
host_id	unsigned integer	The id of the host associated with this KPI for service KPI.	Since 2.8.0 (BBDO 1.2.0).
host_name	string	The name of the host associated with this KPI for service KPI.	Since 2.8.0 (BBDO 1.2.0)
service_id	unsigned integer	The id of the service associated with this KPI for service KPI.	Since 2.8.0 (BBDO 1.2.0).
service_description	string	The description of the service associated with this KPI for service KPI.	Since 2.8.0 (BBDO 1.2.0).
kpi_ba_id	unsigned integer	The id of the BA associated with this KPI for BA KPI.	Since 2.8.0 (BBDO 1.2.0).
kpi_ba_name	string	The name of the BA associated with this KPI for BA KPI.	Since 2.8.0 (BBDO 1.2.0).
meta_service_id	unsigned int	The id of the meta-service associated with this KPI for meta-service KPI.	Since 2.8.0 (BBDO 1.2.0).
meta_service_name	string	The name of the meta-service associated with this KPI for meta-service KPI.	Since 2.8.0 (BBDO 1.2.0).
boolean_id	unsigned int	The id of the boolean expression associated with this KPI for boolean KPI.	Since 2.8.0 (BBDO 1.2.0).
boolean_name	string	The name of the boolean expression associated with this KPI for boolean KPI.	Since 2.8.0 (BBDO 1.2.0).
impact_warning	real	The impact of a warning state for this KPI.	Since 2.8.0 (BBDO 1.2.0).
impact_critical	real	The impact of a critical state for this KPI.	Since 2.8.0 (BBDO 1.2.0).
impact_unknown	real	The impact of a unknown state for this KPI.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Dimension BA BV relation

This event is part of the dimension (i.e configuration) dump occuring at startup and after each BAM configuration reload.

BBDO v2

BAM::DimensionBaBvRelationEvent

Category	element	ID
6	9	393225

The content of this message is serialized as follows:

Property	Type	Description	Version
ba_id	unsigned integer	The id of the BA.	Since 2.8.0 (BBDO 1.2.0).
bv_id	unsigned integer	The id of the BV.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Dimension BV

This event is part of the dimension (i.e configuration) dump occuring at startup and after each BAM configuration reload.

BBDO v2

BAM::DimensionBvEvent

Category	element	ID
6	10	393226

The content of this message is serialized as follows:

Property	Type	Description	Version
bv_id	unsigned integer	The id of the BV.	Since 2.8.0 (BBDO 1.2.0).
bv_name	string	The name of the BV.	Since 2.8.0 (BBDO 1.2.0).
bv_description	string	The description of the BV.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Dimension Truncate Table Signal

This event is part of the dimension (i.e configuration) dump occuring at startup and after each BAM configuration reload.

This signal is sent before the dump of all the dimensions, and again at the end of the dump.

BBDO v2

BAM::DimensionTruncateTableSignal

Category	element	ID
6	11	393228

The content of this message is serialized as follows:

Property	Type	Description
update_started	boolean	True if this is the start of the dump, false if it's the end.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Rebuild signal

This event is sent when a rebuild of the event durations and availabilities is asked to the BAM broker endpoint.

BBDO v2

BAM::Rebuild

Category	element	ID
6	12	393228

The content of this message is serialized as follows:

Property	Type	Description	Version
bas_to_rebuild	string	A string containing the id of all the BAs to rebuild, separated by a comma and a space (i.e "1, 5, 8, 12").	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Dimension timeperiod

This event is part of the dimension (i.e configuration) dump occuring at startup and after each BAM configuration reload.

BBDO v2

BAM::DimensionTimeperiod

Category	element	ID
6	13	393230

The content of this message is serialized as follows:

Property	Type	Description	Version
tp_id	unsigned integer	The id of the timeperiod.	Since 2.8.0 (BBDO 1.2.0).
name	string	The name of the timeperiod.	Since 2.8.0 (BBDO 1.2.0).
monday	string	The timeperiod rule for this day.	Since 2.8.0 (BBDO 1.2.0).
tuesday	string	The timeperiod rule for this day.	Since 2.8.0 (BBDO 1.2.0).
wednesday	string	The timeperiod rule for this day.	Since 2.8.0 (BBDO 1.2.0).
thursday	string	The timeperiod rule for this day.	Since 2.8.0 (BBDO 1.2.0).
friday	string	The timeperiod rule for this day.	Since 2.8.0 (BBDO 1.2.0).
saturday	string	The timeperiod rule for this day.	Since 2.8.0 (BBDO 1.2.0).
sunday	string	The timeperiod rule for this day.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Dimension BA timeperiod relation

This event is part of the dimension (i.e configuration) dump occuring at startup and after each BAM configuration reload.

BBDO v2

BAM::DimensionBaTimeperiodRelation

Category	element	ID
6	14	393231

The content of this message is serialized as follows:

Property	Type	Description	Version
ba_id	unsigned integer	The id of the BA.	Since 2.8.0 (BBDO 1.2.0).
timeperiod_id	unsigned integer	The id of the timeperiod.	Since 2.8.0 (BBDO 1.2.0).
is_default	boolean	True if the timeperiod is the default one for this BA.	Since 2.8.0 (BBDO 1.2.0).

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.

Inherited downtime

BBDO v2

BAM::InheritedDowntime

Category	element	ID
6	17	393233

The content of this message is serialized as follows:

Property	Type	Description	Version
bad_id	unsigned integer	The id of the BA in downtime.
in_downtime	boolean	True if the BA is in downtime.

BBDO v3

The event is the same as in BBDO v2. There is no Protobuf event.