Skip to main content
Version: 22.10

Using packages

Centreon provides RPM packages for its products through the Centreon Open Source version available free of charge in our repository.

These packages can be installed on CentOS 7, on Alma/RHEL/Oracle Linux 8 and on Debian 11.

You must run the installation procedure as a privileged user.

Prerequisites​

After installing your server, update your operating system using the following command:

dnf update

Additional configuration​

If you intend to use Centreon in French, Spanish, Portuguese or German, install the corresponding packages:

dnf install glibc-langpack-fr
dnf install glibc-langpack-es
dnf install glibc-langpack-pt
dnf install glibc-langpack-de

Use the following command to check which languages are installed on your system:

locale -a

Accept all GPG keys and consider rebooting your server if a kernel update is proposed.

Step 1: Pre-installation​

Disable SELinux​

During installation, SELinux should be disabled. To do this, edit the file /etc/selinux/config and replace enforcing by disabled. You can also run the following command:

sed -i s/^SELINUX=.*$/SELINUX=disabled/ /etc/selinux/config

Reboot your operating system to apply the change.

reboot

After the system reboot, perform a quick check of the SELinux status:

getenforce

You should have this result:

Disabled

Note that this deactivation should be temporary. SELinux should be reenabled after installation for security reasons.

Configure or disable the firewall​

If your firewall is active, add firewall rules. You can also disable the firewall during installation by running the following commands:

systemctl stop firewalld
systemctl disable firewalld

Install the repositories​

Remi repository​

To install Centreon you will need to install the remi repository.

Run the following commands:

dnf install -y dnf-plugins-core
dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
dnf install -y https://rpms.remirepo.net/enterprise/remi-release-8.rpm
dnf config-manager --set-enabled 'powertools'

Enable PHP 8.1 using the following commands:

dnf module reset php
dnf module install php:remi-8.1

MariaDB repository​

curl -LsS https://r.mariadb.com/downloads/mariadb_repo_setup | sudo bash -s -- --os-type=rhel --os-version=8 --mariadb-server-version="mariadb-10.5"

Centreon repository​

To install Centreon software, you should first install the Centreon repository.

Install the Centreon repository using this command:

dnf install -y dnf-plugins-core
dnf config-manager --add-repo https://packages.centreon.com/rpm-standard/22.10/el8/centreon-22.10.repo

Step 2: Installation​

This section describes how to install a Centreon Remote Server.

It's possible to install this server with a local database on the server, or a remote database on a dedicated server.

With a local database​

dnf install -y centreon-database centreon-central
systemctl daemon-reload
systemctl restart mariadb

You can now move on to the next step.

With a remote database​

If installing database on a dedicated server, this server should also have the prerequired repositories.

Run the following command on the Central server:

dnf install -y centreon-central

Then run the following commands on the dedicated server:

dnf install -y centreon-database
systemctl daemon-reload
systemctl restart mariadb

Secure your MariaDB installation by executing the following command:

mysql_secure_installation

It is mandatory to set a password for the root user of the database.

Then, in the remote dabatase, create a user with root privileges. You will have to enter this user during the web installation process (at step 6, in the Root user and Root password fields).

CREATE USER '<USER>'@'<IP>' IDENTIFIED BY '<PASSWORD>';
GRANT ALL PRIVILEGES ON *.* TO '<USER>'@'<IP>' WITH GRANT OPTION;
FLUSH PRIVILEGES;

Replace <IP> with the Centreon Central IP address that will connect to the database server.

Replace <USER> and <PASSWORD> by user's credentials.

This user will only be used for the installation process. Once the web installation is complete you can delete this user using:

DROP USER '<USER>'@'<IP>';

The package centreon-database installs an optimized MariaDB configuration to be used with Centreon.

If this package is not installed, system limitation LimitNOFILE should be at least set to 32000 using a dedicated configuration file, example:

$ cat /etc/systemd/system/mariadb.service.d/centreon.conf
[Service]
LimitNOFILE=32000

Same for the MariaDB open_files_limit directive, example for Centos 7, Alma/RHEL/OL 8:

$ cat /etc/my.cnf.d/centreon.cnf
[server]
innodb_file_per_table=1
open_files_limit=32000

For Debian 11:

$ cat /etc/mysql/mariadb.conf.d/80-centreon.cnf
[server]
innodb_file_per_table=1
open_files_limit=32000

Remember to restart MariaDB after a change to configuration.

Additional configuration for Debian 11​

MariaDB has to listen to all interfaces instead of localhost/127.0.0.1, which is the default value. Edit the following file:

/etc/mysql/mariadb.conf.d/50-server.cnf

Set the bind-address parameter to 0.0.0.0.

Step 3: Configuration​

Server name​

If you want, you can change the server's name using the following command:

hostnamectl set-hostname new-server-name

Replace new-server-name by the name you want. Example:

hostnamectl set-hostname remote1

Set the PHP time zone​

You are required to set the PHP time zone.

Run the command:

echo "date.timezone = Europe/Paris" >> /etc/php.d/50-centreon.ini

Replace Europe/Paris by your time zone. You can find the list of supported time zones here.

After saving the file, please do not forget to restart the PHP-FPM service:

systemctl restart php-fpm

Services startup during system bootup​

To make services start automatically during system bootup, run these commands on the central server:

systemctl enable php-fpm httpd centreon cbd centengine gorgoned snmptrapd centreontrapd snmpd
systemctl enable crond
systemctl start crond

Then execute the following command (on the remote server if you are using a local database, or on your dedicated database server):

systemctl enable mariadb
systemctl restart mariadb

Secure the database​

If you have installed the Centreon server with a local database, since MariaDB 10.5, it is mandatory to secure the database's root access before installing Centreon. Run the following command:

mysql_secure_installation
  • Answer yes to all questions except "Disallow root login remotely?".
  • It is mandatory to set a password for the root user of the database. You will need this password during the web installation.

For more information, please see the official MariaDB documentation.

Step 4: Web installation​

  1. Start the Apache server with the following command:
systemctl start httpd
  1. To complete the installation, follow the web installation steps procedure.

During web installation, it is not necessary to install Autodiscovery module.

In the step Initialization of the monitoring, only the actions from 6 to 8 must be done.

Step 5: Register the server​

To transform the server into a Remote Server and to register it to the Central server or to another Remote server, execute the following command on the future remote server:

/usr/share/centreon/bin/registerServerTopology.sh -u <API_ACCOUNT> \
-t remote -h <IP_TARGET_NODE> -n <REMOTE_NAME>

Example:

/usr/share/centreon/bin/registerServerTopology.sh -u admin -t remote -h 192.168.0.1 -n remote-1

Replace <IP_TARGET_NODE> by the IP of the central server, as seen by the remote server.

The <API_ACCOUNT> must have access to the configuration API. You can use the default admin account.

If you need to change the HTTP method or the port, you can use the following format for the -h option: HTTPS:/<IP_TARGET_NODE>:PORT

Then follow instructions by

  1. Entering your password:

    192.168.0.1: please enter your password:

  2. Select the IP address if multiple network interfaces exist:

    Which IP do you want to use as CURRENT NODE IP ?
    1) 192.168.0.2
    2) 192.168.0.3
    1

  3. Then validate the information:

    Summary of the informations that will be send:

    Api Connection:
    username: admin
    password: ******
    target server: 192.168.0.1

    Pending Registration Server:
    name: remote-1
    type: remote
    address: 192.168.0.2

    Do you want to register this server with those informations ? (y/n)y

  4. Add additional information to enable future communication between your Remote Server and its Central, fill in the required information to convert your platform into a Remote server:

<CURRENT_NODE_ADDRESS> : Please enter your username:
admin
<CURRENT_NODE_ADDRESS> : Please enter your password:

<CURRENT_NODE_ADDRESS> : Protocol [http]:
<CURRENT_NODE_ADDRESS> : Port [80]:
<CURRENT_NODE_ADDRESS> : centreon root folder [centreon]:

  1. If you use a proxy, please define credentials:

    Are you using a proxy ? (y/n)
    y
    enter your proxy Host:
    myproxy.example.com
    enter your proxy Port [3128]:
    Are you using a username/password ? (y/n)
    y
    enter your username:
    my_proxy_username
    enter your password:

You will receive the validation of the Centreon central server:

2020-10-16T17:19:37+02:00 [INFO]: The CURRENT NODE 'remote: 'remote-1@192.168.0.2' has been converted and registered successfully.

Main error messages​

2020-10-20T10:23:15+02:00 [ERROR]: Invalid credentials

Your credentials are incorrect for the <API_ACCOUNT>.

2020-10-20T10:24:59+02:00 [ERROR]: Access Denied.

The <API_ACCOUNT> doesn't have access to configuration API.

Failed connect to 192.168.0.1:444; Connection refused

Unable to access to the API. Please check <IP_TARGET_NODE>, scheme and port.

2020-10-20T10:39:30+02:00 [ERROR]: Can’t connect to the API using: https://192.168.0.1:443/centreon/api/latest/login

The access url is not complete or invalide. Use the --root option to define the API URL Path. For example: --root monitoring.

2020-10-20T10:42:23+02:00 [ERROR]: No route found for “POST /centreon/api/latest/platform/topology”

Your Centreon target version is invalid. It should be greater or equal to 22.10.

Step 6: Extend local DBMS rights​

Finally, add rights to centreon database user to use LOAD DATA INFILE command:

mysql -u root -p
GRANT FILE on *.* to 'centreon'@'localhost';
exit

Step 7: Add the Remote Server to configuration​

Go to the Add a Remote Server to configuration.

Step 8: Secure your platform​

Do not forget to secure your Centreon platform following our recommendations