Skip to main content
Version: 24.04

Configuring Gorgone in pull mode

This procedure describes how to configure Gorgone between a distant poller and a central server.

  • Pull mode allows the poller to act as a client and connect to the Central (which will be the server).

  • Pull mode is relevant when firewalls are set on pollers and prevent incoming traffic.

  • Pull mode is relevant when the Central is in the cloud and pollers are not reachable through the usual IP addresses. In that situation, the pull (or reverse) mode is used to make each poller initiate a connection to the public IP address of the Central. Learn more about this use case in this article.

Note: In our case, we have the configuration described below (you must adapt the procedure to your configuration).

Central server:

  • address: 10.30.2.203

Distant Poller:

  • id: 6 (configured in the Centreon interface as zmq. You can get this ID from the Centreon interface).
  • address: 10.30.2.179
  • rsa public key thumbprint: nJSH9nZN2ugQeksHif7Jtv19RQA58yjxfX-Cpnhx09s

On the remote poller side​

Installation requirements​

Ensure the remote poller and Gorgone are already installed.

Configuration​

Configure the file /etc/centreon-gorgone/config.d/40-gorgoned.yaml as follows:

name:  distant-server
description: Configuration for distant server
gorgone:
  gorgonecore:
    id: 6
    privkey: "/var/lib/centreon-gorgone/.keys/rsakey.priv.pem"
    pubkey: "/var/lib/centreon-gorgone/.keys/rsakey.pub.pem"

  modules:
    - name: action
      package: gorgone::modules::core::action::hooks
      enable: true

    - name: engine
      package: gorgone::modules::centreon::engine::hooks
      enable: true
      command_file: "/var/lib/centreon-engine/rw/centengine.cmd"

    - name: pull
      package: "gorgone::modules::core::pull::hooks"
      enable: true
      target_type: tcp
      target_path: 10.30.2.203:5556
      ping: 1

On the Central server side​

Installation requirements​

Ensure the Central server and Gorgone are already installed.

Configuration​

Configure the file /etc/centreon-gorgone/config.d/40-gorgoned.yaml as follows:

...
gorgone:
  gorgonecore:
    ...
    external_com_type: tcp
    external_com_path: "*:5556"
    authorized_clients:
      - key: nJSH9nZN2ugQeksHif7Jtv19RQA58yjxfX-Cpnhx09s
    ...
  modules:
    ...
    - name: register
      package: "gorgone::modules::core::register::hooks"
      enable: true
      config_file: /etc/centreon-gorgone/nodes-register-override.yml
    ...

We created the file /etc/centreon-gorgone/nodes-register-override.yml:

nodes:
  - id: 6
    type: pull
    prevail: 1