Skip to main content
Version: ⭐ 24.10

Upgrade from Centreon 23.10

This chapter describes how to upgrade your Centreon platform from version 23.10 to version 24.10.

When you upgrade your central server, make sure you also upgrade all your remote servers and your pollers. All servers in your architecture must have the same version of Centreon. In addition, all servers must use the same version of the BBDO protocol.

If you want to migrate your Centreon platform to another server/OS, follow the migration procedure.

Business edition users: MAP Legacy is no longer available in Centreon 24.10. If you are still using MAP Legacy, you will need to migrate to MAP. See MAP Legacy end of life.

Version 24.10 means the end of support for Debian 11. If you were using Debian 11, you must first migrate to Debian 12 before you can upgrade Centreon. See How to migrate from Debian 11 to Debian 12.

Prerequisites​

Perform a backup​

Be sure that you have fully backed up your environment for the following servers:

  • Central server
  • Database server

Upgrade the Centreon Central server​

When you run a command, check its output. If you get an error message, stop the procedure and fix the issue.

Install the new repositories​

  1. Update your Centreon 23.10 to the latest minor version.

  2. Remove the repository files:

    rm /etc/yum.repos.d/centreon-23.10.repo
    rm /etc/yum.repos.d/centreon.repo

  3. Install the new repository:

dnf install -y dnf-plugins-core
dnf config-manager --add-repo https://packages.centreon.com/rpm-standard/24.10/el8/centreon-24.10.repo

If you have an offline license, also remove the old Monitoring Connectors repository, then install the new one.

If you have a Business edition, do the same with the Business repository.

You can find the address of these repositories on the support portal.

Upgrade PHP​

Centreon 24.10 uses PHP in version 8.2.

You need to change the PHP stream from version 8.1 to 8.2 by executing the following commands and answering y to confirm:

dnf module reset php
dnf module enable php:remi-8.2

Upgrade the Centreon solution​

Make sure all users are logged out from the Centreon web interface before starting the upgrade procedure.

If you have installed Business extensions, update the Business repository to version 24.10. Visit the support portal to get its address.

If your OS is Debian 12 and you have a customized Apache configuration, perform a backup of your configuration file (/etc/apache2/sites-available/centreon.conf).

Stop the Centreon Broker process:

systemctl stop cbd

Delete existing retention files:

rm /var/lib/centreon-broker/* -f

Clean the cache:

dnf clean all --enablerepo=*

Then upgrade all the components with the following command:

dnf update centreon\* php-pecl-gnupg

Accept new GPG keys from the repositories as needed.

Update your customized Apache configuration​

This section only applies if you customized your Apache configuration.

When you upgrade your platform, the Apache configuration file is not upgraded automatically. The new configuration file brought by the rpm does not replace the old file. You must copy the changes manually to your customized configuration file.

Run a diff between the old and the new Apache configuration files:

diff -u /etc/httpd/conf.d/10-centreon.conf /etc/httpd/conf.d/10-centreon.conf.rpmnew
  • 10-centreon.conf (post upgrade): this file contains the custom configuration. It does not contain anything new brought by the upgrade.
  • 10-centreon.conf.rpmnew (post upgrade): this file is provided by the rpm; it does not contain any custom configuration.

For each difference between the files, assess whether you should copy it from 10-centreon.conf.rpmnew to 10-centreon.conf.

Check that Apache is configured properly by running the following command:

apachectl configtest

The expected result is the following:

Syntax OK

Restart the Apache and PHP processes to take the new configuration into account:

systemctl restart php-fpm httpd

Then check its status:

systemctl status httpd

If everything is ok, you should have:

● httpd.service - The Apache HTTP Server
   Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled; vendor preset: disabled)
  Drop-In: /usr/lib/systemd/system/httpd.service.d
           └─php-fpm.conf
   Active: active (running) since Tue 2020-10-27 12:49:42 GMT; 2h 35min ago
     Docs: man:httpd.service(8)
 Main PID: 1483 (httpd)
   Status: "Total requests: 446; Idle/Busy workers 100/0;Requests/sec: 0.0479; Bytes served/sec: 443 B/sec"
    Tasks: 278 (limit: 5032)
   Memory: 39.6M
   CGroup: /system.slice/httpd.service
           ├─1483 /usr/sbin/httpd -DFOREGROUND
           ├─1484 /usr/sbin/httpd -DFOREGROUND
           ├─1485 /usr/sbin/httpd -DFOREGROUND
           ├─1486 /usr/sbin/httpd -DFOREGROUND
           ├─1487 /usr/sbin/httpd -DFOREGROUND
           └─1887 /usr/sbin/httpd -DFOREGROUND

Customized Apache configuration: enable text compression​

In order to improve page loading speed, you can activate text compression on the Apache server. It requires the brotli package to work. This is optional, but it provides a better user experience.

Add the following code to your Apache configuration file, in both the <VirtualHost *:80> and <VirtualHost *:443> elements:

<IfModule mod_brotli.c>
    AddOutputFilterByType BROTLI_COMPRESS text/html text/plain text/xml text/css text/javascript application/javascript application/json
</IfModule>
AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css text/javascript application/javascript application/json

Finalizing the upgrade​

Before starting the web upgrade process, reload the Apache server with the following command:

systemctl reload php-fpm httpd

Then you need to finalize the upgrade process:

  1. Log on to the Centreon web interface to continue the update process. Click Next:

    image

  2. Click Next:

    image

  3. The release notes describe the main changes. Click Next:

    image

  4. This process performs the various upgrades. Click Next:

    image

  5. Your Centreon server is now up to date. Click Finish to access the login page:

    image

    If the Centreon BAM module is installed, refer to the update procedure.

  6. Deploy the central's configuration from the Centreon web UI by following this procedure.

Finally, restart Broker, Engine and Gorgone on the central server by running this command:

systemctl restart cbd centengine gorgoned

Update the permissions on the centreon-broker configuration files.

usermod -a -G centreon-broker apache
usermod -a -G apache centreon-broker

If the Centreon BAM module is installed, refer to the upgrade procedure.

Post-upgrade actions​

  1. Upgrade extensions. From Administration > Extensions > Manager, upgrade all extensions, starting with the following:

    • License Manager,

    • Monitoring Connector Manager,

    • Auto Discovery.

      Then you can upgrade all other commercial extensions.

  2. Deploy the configuration.

  3. Restart the processes:

    systemctl restart cbd centengine centreontrapd gorgoned

Upgrade MariaDB​

Follow this procedure to upgrade MariaDB to version 10.11.

Upgrade the Remote Servers​

This procedure is the same as for upgrading a Centreon Central server.

At the end of the update, the configuration should be deployed from the Central server.

Upgrade the Pollers​

Update the Centreon repository​

Run the following command:

dnf install -y dnf-plugins-core
dnf config-manager --add-repo https://packages.centreon.com/rpm-standard/24.10/el8/centreon-24.10.repo

Upgrade the Centreon solution​

Clean the cache:

dnf clean all --enablerepo=*

Then upgrade all the components with the following command:

dnf update centreon\*

Accept new GPG keys from the repositories as needed.

Restart centreon:

systemctl restart centreon