Supermicro BMC SNMP

Pack Assets

Monitored Objects

The Pack Supermicro collects metrics for:

Sensors

Collected Metrics

Sensors

Metric name	Description	Unit
sensor status	Status of the sensor
sensor_name#hardware.sensor.reading.count	Sensor reading value

Prerequisites

To monitor your Supermicro, the Baseboard Management Controller must be configured (eg: https://www.supermicro.com/en/solutions/management-software/bmc-resources) The Poller should be able to perform SNMP requests toward the Lenovo device over SNMP UDP/161 port.

Setup

Online License
Offline License

Install the Centreon Plugin on every Poller:

yum install centreon-plugin-Hardware-Servers-Supermicro-Bmc-Snmp

On the Centreon Web interface in Configuration > Monitoring Connector Manager, install the Supermicro BMC SNMP Pack

Install the Centreon Plugin on every Poller:

yum install centreon-plugin-Hardware-Servers-Supermicro-Bmc-Snmp

On the Centreon Central server, install the Centreon Pack from the RPM:

yum install centreon-pack-hardware-servers-supermicro-bmc-snmp

On the Centreon Web interface in Configuration > Monitoring Connector Manager, install the Supermicro BMC SNMP Pack

Host configuration

Add a new Host and fill the IP Address/FQDN, SNMP Version and SNMP Community fields according to the device's configuration
Apply the HW-Server-Supermicro-Bmc-SNMP-custom Host Template

When using SNMP v3, use the SNMPEXTRAOPTIONS Macro to add specific authentication parameters More information in the Troubleshooting SNMP section.

Mandatory	Name	Description
	SNMPEXTRAOPTIONS	Configure your own SNMPv3 credentials combo

How to test the Plugin and what are the main options for?

Once the plugin installed, log into your Centreon Poller CLI using the centreon-engine user account and test the Plugin by running the following command:

/usr/lib/centreon/plugins/centreon_supermicro_bmc_snmp.pl
    --plugin=hardware::server::supermicro::bmc::snmp::plugin
    --mode=sensors
    --hostname=10.30.2.114
    --snmp-version='2c'
    --snmp-community='supermicro_ro'
    --verbose

Expected command output is shown below:

OK: All 60 components are ok [60/60 sensors]. | 'CPU1 Temp#hardware.sensor.reading.count'=61;10:96;5:101;; 'CPU2 Temp#hardware.sensor.reading.count'=44;10:96;5:101;; 'PCH Temp#hardware.sensor.reading.count'=43;10:85;5:90;; 'System Temp#hardware.sensor.reading.count'=29;10:80;5:85;; 'Peripheral Temp#hardware.sensor.reading.count'=33;10:80;5:85;; 'VRMCpu1 Temp#hardware.sensor.reading.count'=39;10:95;5:100;; 'VRMCpu2 Temp#hardware.sensor.reading.count'=34;10:95;5:100;; 'VRMP1ABC Temp#hardware.sensor.reading.count'=36;10:95;5:100;; 'VRMP1DEF Temp#hardware.sensor.reading.count'=37;10:95;5:100;; 'VRMP2ABC Temp#hardware.sensor.reading.count'=37;10:95;5:100;; 'VRMP2DEF Temp#hardware.sensor.reading.count'=36;10:95;5:100;; 'FAN1#hardware.sensor.reading.count'=4700;700:25300;500:25400;; 'FAN2#hardware.sensor.reading.count'=4600;700:25300;500:25400;; 'FAN7#hardware.sensor.reading.count'=4700;700:25300;500:25400;; 'FAN8#hardware.sensor.reading.count'=4700;700:25300;500:25400;; 'P1-DIMMA1 Temp#hardware.sensor.reading.count'=52;10:80;5:85;; 'P1-DIMMA2 Temp#hardware.sensor.reading.count'=45;10:80;5:85;; 'P1-DIMMB1 Temp#hardware.sensor.reading.count'=58;10:80;5:85;; 'P1-DIMMB2 Temp#hardware.sensor.reading.count'=55;10:80;5:85;; 'P1-DIMMC1 Temp#hardware.sensor.reading.count'=51;10:80;5:85;; 'P1-DIMMC2 Temp#hardware.sensor.reading.count'=59;10:80;5:85;; 'P1-DIMMD1 Temp#hardware.sensor.reading.count'=49;10:80;5:85;; 'P1-DIMMD2 Temp#hardware.sensor.reading.count'=46;10:80;5:85;; 'P1-DIMME1 Temp#hardware.sensor.reading.count'=40;10:80;5:85;; 'P1-DIMME2 Temp#hardware.sensor.reading.count'=44;10:80;5:85;; 'P1-DIMMF1 Temp#hardware.sensor.reading.count'=40;10:80;5:85;; 'P1-DIMMF2 Temp#hardware.sensor.reading.count'=39;10:80;5:85;; 'P2-DIMMA1 Temp#hardware.sensor.reading.count'=45;10:80;5:85;; 'P2-DIMMA2 Temp#hardware.sensor.reading.count'=41;10:80;5:85;; 'P2-DIMMB1 Temp#hardware.sensor.reading.count'=44;10:80;5:85;; 'P2-DIMMB2 Temp#hardware.sensor.reading.count'=45;10:80;5:85;; 'P2-DIMMC1 Temp#hardware.sensor.reading.count'=43;10:80;5:85;; 'P2-DIMMC2 Temp#hardware.sensor.reading.count'=43;10:80;5:85;; 'P2-DIMMD1 Temp#hardware.sensor.reading.count'=48;10:80;5:85;; 'P2-DIMMD2 Temp#hardware.sensor.reading.count'=42;10:80;5:85;; 'P2-DIMME1 Temp#hardware.sensor.reading.count'=49;10:80;5:85;; 'P2-DIMME2 Temp#hardware.sensor.reading.count'=51;10:80;5:85;; 'P2-DIMMF1 Temp#hardware.sensor.reading.count'=38;10:80;5:85;; 'P2-DIMMF2 Temp#hardware.sensor.reading.count'=44;10:80;5:85;; '12V#hardware.sensor.reading.count'=12.366;10.780:12.915;10.536:13.281;; '5VCC#hardware.sensor.reading.count'=5.030;4.520:5.600;4.280:5.720;; '3.3VCC#hardware.sensor.reading.count'=3.401;2.976:3.707;2.823:3.775;; 'VBAT#hardware.sensor.reading.count'=4;;;; 'Vcpu1#hardware.sensor.reading.count'=1.800;1.395:2.097;1.260:2.304;; 'Vcpu2#hardware.sensor.reading.count'=1.800;1.395:2.097;1.260:2.304;; 'VDimmP1ABC#hardware.sensor.reading.count'=1.200;1.086:1.350;1.026:1.374;; 'VDimmP1DEF#hardware.sensor.reading.count'=1.194;1.086:1.350;1.026:1.374;; 'VDimmP2ABC#hardware.sensor.reading.count'=1.200;1.086:1.350;1.026:1.374;; 'VDimmP2DEF#hardware.sensor.reading.count'=1.200;1.086:1.350;1.026:1.374;; '12VSB#hardware.sensor.reading.count'=12.325;10.765:12.910;10.505:13.300;; '3.3VSB#hardware.sensor.reading.count'=3.443;2.979:3.699;2.819:3.763;; 'P1V8_PCH#hardware.sensor.reading.count'=1.737;1.629:2.025;1.539:2.061;; 'PVNN_PCH#hardware.sensor.reading.count'=1.006;0.904:1.120;0.856:1.144;; 'P1V05_PCH#hardware.sensor.reading.count'=1.050;0.948:1.176;0.900:1.200;; 'PS1 Status#hardware.sensor.reading.count'=1;;;; 'PS2 Status#hardware.sensor.reading.count'=1;;;; 'NVMe_SSD Temp#hardware.sensor.reading.count'=33;10:65;5:70;; 'AOC_SAS Temp#hardware.sensor.reading.count'=68;10:100;5:105;; 'HDD Temp#hardware.sensor.reading.count'=31;10:50;5:55;; 'HDD Status#hardware.sensor.reading.count'=1;;;; 'hardware.sensor.count'=60;;;;
Checking sensors
sensor 'CPU1 Temp' reading is '61' [instance: 1#CPU1 Temp]
sensor 'CPU2 Temp' reading is '44' [instance: 2#CPU2 Temp]
sensor 'PCH Temp' reading is '43' [instance: 3#PCH Temp]
sensor 'System Temp' reading is '29' [instance: 4#System Temp]
sensor 'Peripheral Temp' reading is '33' [instance: 5#Peripheral Temp]
sensor 'VRMCpu1 Temp' reading is '39' [instance: 8#VRMCpu1 Temp]
sensor 'VRMCpu2 Temp' reading is '34' [instance: 9#VRMCpu2 Temp]
sensor 'VRMP1ABC Temp' reading is '36' [instance: 10#VRMP1ABC Temp]
sensor 'VRMP1DEF Temp' reading is '37' [instance: 11#VRMP1DEF Temp]
sensor 'VRMP2ABC Temp' reading is '37' [instance: 12#VRMP2ABC Temp]
sensor 'VRMP2DEF Temp' reading is '36' [instance: 13#VRMP2DEF Temp]
sensor 'FAN1' reading is '4700' [instance: 14#FAN1]
sensor 'FAN2' reading is '4600' [instance: 15#FAN2]
sensor 'FAN7' reading is '4700' [instance: 20#FAN7]
sensor 'FAN8' reading is '4700' [instance: 21#FAN8]
sensor 'P1-DIMMA1 Temp' reading is '52' [instance: 23#P1-DIMMA1 Temp]
sensor 'P1-DIMMA2 Temp' reading is '45' [instance: 24#P1-DIMMA2 Temp]
sensor 'P1-DIMMB1 Temp' reading is '58' [instance: 25#P1-DIMMB1 Temp]
sensor 'P1-DIMMB2 Temp' reading is '55' [instance: 26#P1-DIMMB2 Temp]
sensor 'P1-DIMMC1 Temp' reading is '51' [instance: 27#P1-DIMMC1 Temp]
sensor 'P1-DIMMC2 Temp' reading is '59' [instance: 28#P1-DIMMC2 Temp]
sensor 'P1-DIMMD1 Temp' reading is '49' [instance: 29#P1-DIMMD1 Temp]
sensor 'P1-DIMMD2 Temp' reading is '46' [instance: 30#P1-DIMMD2 Temp]
sensor 'P1-DIMME1 Temp' reading is '40' [instance: 31#P1-DIMME1 Temp]
sensor 'P1-DIMME2 Temp' reading is '44' [instance: 32#P1-DIMME2 Temp]
sensor 'P1-DIMMF1 Temp' reading is '40' [instance: 33#P1-DIMMF1 Temp]
sensor 'P1-DIMMF2 Temp' reading is '39' [instance: 34#P1-DIMMF2 Temp]
sensor 'P2-DIMMA1 Temp' reading is '45' [instance: 35#P2-DIMMA1 Temp]
sensor 'P2-DIMMA2 Temp' reading is '41' [instance: 36#P2-DIMMA2 Temp]
sensor 'P2-DIMMB1 Temp' reading is '44' [instance: 37#P2-DIMMB1 Temp]
sensor 'P2-DIMMB2 Temp' reading is '45' [instance: 38#P2-DIMMB2 Temp]
sensor 'P2-DIMMC1 Temp' reading is '43' [instance: 39#P2-DIMMC1 Temp]
sensor 'P2-DIMMC2 Temp' reading is '43' [instance: 40#P2-DIMMC2 Temp]
sensor 'P2-DIMMD1 Temp' reading is '48' [instance: 41#P2-DIMMD1 Temp]
sensor 'P2-DIMMD2 Temp' reading is '42' [instance: 42#P2-DIMMD2 Temp]
sensor 'P2-DIMME1 Temp' reading is '49' [instance: 43#P2-DIMME1 Temp]
sensor 'P2-DIMME2 Temp' reading is '51' [instance: 44#P2-DIMME2 Temp]
sensor 'P2-DIMMF1 Temp' reading is '38' [instance: 45#P2-DIMMF1 Temp]
sensor 'P2-DIMMF2 Temp' reading is '44' [instance: 46#P2-DIMMF2 Temp]
sensor '12V' reading is '12.366' [instance: 47#12V]
sensor '5VCC' reading is '5.030' [instance: 48#5VCC]
sensor '3.3VCC' reading is '3.401' [instance: 49#3.3VCC]
sensor 'VBAT' reading is '4' [instance: 50#VBAT]
sensor 'Vcpu1' reading is '1.800' [instance: 51#Vcpu1]
sensor 'Vcpu2' reading is '1.800' [instance: 52#Vcpu2]
sensor 'VDimmP1ABC' reading is '1.200' [instance: 53#VDimmP1ABC]
sensor 'VDimmP1DEF' reading is '1.194' [instance: 54#VDimmP1DEF]
sensor 'VDimmP2ABC' reading is '1.200' [instance: 55#VDimmP2ABC]
sensor 'VDimmP2DEF' reading is '1.200' [instance: 56#VDimmP2DEF]
sensor '12VSB' reading is '12.325' [instance: 57#12VSB]
sensor '3.3VSB' reading is '3.443' [instance: 58#3.3VSB]
sensor 'P1V8_PCH' reading is '1.737' [instance: 59#P1V8_PCH]
sensor 'PVNN_PCH' reading is '1.006' [instance: 60#PVNN_PCH]
sensor 'P1V05_PCH' reading is '1.050' [instance: 61#P1V05_PCH]
sensor 'PS1 Status' reading is '1' [instance: 63#PS1 Status]
sensor 'PS2 Status' reading is '1' [instance: 64#PS2 Status]
sensor 'NVMe_SSD Temp' reading is '33' [instance: 65#NVMe_SSD Temp]
sensor 'AOC_SAS Temp' reading is '68' [instance: 66#AOC_SAS Temp]
sensor 'HDD Temp' reading is '31' [instance: 67#HDD Temp]
sensor 'HDD Status' reading is '1' [instance: 68#HDD Status]

The command above monitors Supermicro hardware (--plugin=hardware::server::supermicro::bmc::snmp::plugin --mode=sensors) identified by the IP address 10.30.2.114 (--hostname=10.30.2.114). As the Plugin is using the SNMP protocol to request the device, the related community and version are specified (--snmp-version='2c' --snmp-community='supermicro_ro').

All the options as well as all the available thresholds can be displayed by adding the --help parameter to the command:

/usr/lib/centreon/plugins/centreon_supermicro_bmc_snmp.pl
    --plugin=hardware::server::supermicro::bmc::snmp::plugin
    --mode=sensors
    --help

Troubleshooting

Troubleshooting plugins

Pack Assets​

Monitored Objects​

Collected Metrics​

Prerequisites​

Setup​

Host configuration​

How to test the Plugin and what are the main options for?​

Troubleshooting​