Aruba Standard
Prerequisitesβ
Centreon Pluginβ
Install this plugin on each needed poller:
yum install centreon-plugin-Network-Switchs-Aruba-Standard-Snmp
Configure SNMPβ
Follow constructor procedure to enable and configure SNMP on the equipment.
Read this guide to troubleshoot SNMP problems.
Centreon Configurationβ
Create hosts using the appropriate templateβ
Both controllers and access points can be monitored using specific host templates.
Be sure to have with you the following information:
- Read-only SNMP community
- IP Address of the equipment
Controllerβ
Go to Configuration > Hosts and click Add. Then, fill the form as shown by the following table:
Field | Value |
---|---|
Name | Name of the controller |
Alias | Description |
IP Address / DNS | IP address of the controller |
SNMP Community & Version | Community and version of the SNMP agent |
Monitored from | Poller used to monitor |
Templates | Net-Aruba-Standard-Controller-SNMP-custom |
Check the Create Services linked to the Template too box and click on the Save button.
The following services will be created:
- Cpu
- Memory
- Storage
- Hardware
- License
- Controller-Status
The following rules are linked to this host template:
- Net-Aruba-Standard-SNMP-Packet-Errors-Name
- Net-Aruba-Standard-SNMP-Traffic-Name
Access Pointβ
Go to Configuration > Hosts and click Add. Then, fill the form as shown by the following table:
Field | Value |
---|---|
Name | Name of the access point |
Alias | Description |
IP Address / DNS | IP address of the controller |
SNMP Community & Version | Community and version of the SNMP agent |
Monitored from | Poller used to monitor |
Templates | Net-Aruba-Standard-Ap-SNMP-custom |
The following host macros should be set as shown:
Macro | Value |
---|---|
APNAME | Name of the access point |
Check the Create Services linked to the Template too box and click on the Save button.
The following services will be created:
- Ap-Ssid-Statistics
- Ap-Status